Biology Laboratory Apparatus

Set of 11 including: skeleton circulatory system heart nervous system section of brain muscles digestive system respiratory system the ear the eye human kidneys.

Description :

• 20x35cm sheet only.
• 20x35cm complete with hard backing.
• 35x50cm sheet only.
• 35x50cm with hard backing.
• 50x70cm sheet only.
• 50x70cm with hard backings.

Set of 8 including:

• Root-stem-bud
• Leaves & their transformation
• Photosynthesis
• Flower & inflorescence
• Fruits & seeds

Set of 8 including:

• Typical plant cell
• Plant mitosis, meiosis
• DNA
• RNA
• Bacteria
• Spirogyra
• Funaria.

Set of 8 including:

• Fertilization
• TS dicot leaf
• TS monocot lead
• TS dicot root
• TS monocot root
• TS dicot stem
• TS monocot stem
• Types of placentation

Set of 8 including: plant kingdom, germination of sunflower & maize, germination of bean & pea, yeast, rhizopus & mucor, fern, insectivorious plants, malvaceae 

It is very useful for elementary biology class students for cutting their sections for microscopic examination of various organisms. Can be fixed with table clamp.  

For section cutting. Brass top plate 6. 3cm diameter. With centered hole 2. 3cm diameter. Overall length 7. 5cm. The milled head at the base when revolved records 20 microns per click.  

High quality steel, flat one side, the other being hollow ground. 

Ideal for student use and routine work for cutting paraffin embedded specimens of comparatively soft tissues. It cuts long ribbons of sections from specimens not exceeding 20mm diameter and using wood blocks, sections of specimens up to 18×25mm can be cut. The thickness of the sections may be varied between 2 and 24 microns. Supplied with simple object holder, knife and honing stone. 

For medical institutions, biology & research laboratories etc. Gives very good results for cutting thin sections. It is mounted on a heavy cast iron base to ensure rigidity, stability and the housing gives maximum protection to the mechanism against dust and paraffin waste etc. The driving handle can be locked at any position. Can cut sections 1μ to 25μ by means of a knurled knob provided in front of the instrument. Supplied with honing plate, three object holders and oil-can in a wooden protective case.  

A heavy base with hinged cover for protecting the interior mechanism, and knife holder. With every complete revolution of the drive wheel, the feed panel engaged the teeth of ratchet wheel which advances the object holder through cone and inclined plane mechanism, tissue sections can be cut down to even 1μ. A safety device automatically disengages the feed mechanism. Feed indicator is in front and feed setting is at back of microtome which sets 1μ to 50μ. A razor 120mm made from heat treated steel and tested for micro structure is supplied with instrument. It also has a tilting razor angle system adjustable up to 30° on a reference scale.  

Biological dissecting instruments set consisting of 7 instruments housed in velvet lined plastic pouch bag. The set contains the following instruments: 2 scissors 2 forceps 1 needle pointed 1 bp handle with blade 1 needle, plastic handle.  

Biological dissecting instruments set consisting of 14 instruments, all made of stainless steel. The set contains the following instruments: 2 scissors 2 forceps 4 needles 1 scalpel 1 bp handle with blade 1 dropper plastic 1 magnifying glass 1 chain and hook 1 blow pipe 

Stainless steel fine pointed curved ends. Length 110mm.  

Stainless steel, sharp meshing teeth on the tips.
Length 130mm.  

Stainless steel, mosquito, screw joint, straight, length 130mm.  

Stainless steel, mosquito, screw joint, straight, length 130mm.  

Strong stainless steel handles slotted to accept blades. 

Polystyrene, autoclavable handles slotted to accept blades. 

Sterilized, surgical quality steel blades for use with above handles. Supplied in metal foil packing.  

Very fine points for delicate work closed shanks, stainless steel.
overall length 100mm.  

Stainless steel, closed shanks.
overall length 125mm.  

Fine points, open shanks, stainless steel.
overall length 110mm.  

Steel pointed needle, mounted in 100mm hardwood handle.  

Stainless steel throughout. Handle length 95mm. Needle length 35mm.  

All stainless steel, blunt end needle, length 95mm. Overall length 130mm.  

Stainless steel. Overall length 150mm with 50mm bent-up blade.  

Stout steel spike, length 55mm, with large wood handle for ease of insertion into dissecting board.

Selected soft wood in one piece. Pin can be easily pressed with the help of hand only. The frame edge 17mm deep with linseed oil protection.  

Made from aluminium sheet. Rectangular, with flanged edges. 

Made of GI sheet, duly painted, size 250 × 300mm fitted with corners for holding wax. Supplied complete with wax.  

Made of GI sheet, duly painted, size 250 × 300mm fitted with corners for holding wax.  

Made of GI sheet, duly painted, size 250 × 300mm fitted with corners for holding wax.

For measurement of systolic and diastolic blood pressure of human beings in metabolic rate. Mercury type manometer, manually operated instrument, includes inflatable cuff-arm with velcro, inflating rubber-bulb bellow with non-return air valve having captive air bleed screw, all connected through flexible rubber tubing. Comes in a metal box.  

This is a simplified form of ganong's respirometer, with an inverted 'u' tube in place of the respiration chamber. Length 460mm, u-tube diameter 20mm, pipette 1ml × 0. 01ml.  

To measure the quantity of water given off by a plant. Consists of a glass vessel 250 × 50mm (height × diameter), with a side tube graduated 0 to 15cm × 1mm.  

To measure transpiration, without breakage. Only one glass component (the capillary tube) and is mounted on a strong backing plate. It consists of a capillary tube with millimeter scale connected via a three way tap to a syringe. The cut shoot is connected to the third outlet. It can also be used to measure humidity by connecting a porous pot to the third outlet. Dimensions overall 155 × 165 × 60mm (width × height × length). Capillary tube 120 × 1mm ( length × bore).  

Comprises a horizontal glass tube with one end vertical to take a plant shoot and the other end connected by rubber tubing to narrow bore glass tube with a scale. A vertical limb on the tube is connected to a thistle funnel by rubber tubing fitted with a spring clip. Mounted on a wooden stand to which the plant shoot can be attached for support.  

Comprises a narrow bore bent glass tube clipped to a scale 0 to 30cm × 1mm and fitted by a rubber stopper in a wide mouth bottle. The stopper is also fitted with a dropping funnel and has a hole to take the stem of a plant.

Comprises a graduated, narrow bore, horizontal glass measuring tube with a vessel for a plant shoot at one end and having a vertical limb with a stopcock and a funnel fitted by a ground glass joint. Mounted on a wooden stand. For demonstration, of transpiration rates and rates of water absorption by a cut shoot under various external conditions. A plant shoot is sealed into a stopper which fits the end tube, and the whole apparatus is filled with water, the open end of the capillary tube, which is graduated in millimeters, dipping into a beaker of water. The position of the air bubble may easily be adjusted by opening the glass stopcock to admit water from the central reservoir. The whole apparatus is mounted on a varnished wooden base by spring clips. Comprises a graduate, narrow bore, horizontal glass measuring tubes with a vessel for plant shot at one end and having a vertical limb with a teflon stopcock and a funnel fitted by a ground glass joint. Height to top of reservoir 170mm, diameter of reservoir 20mm length, overall 320mm, base 320×80mm(l × w), capillary bore 1mm.  

Comprises glass tube with upper end of straight limb closed with rubber stopper, lower end of limb with bored rubber stopper to take length of capillary tubing.  

For measuring and analyzing gas evolved by the plants such as elodea. Comprise two syringes connected to a collecting tube through a 3-way tap. This arrangement enables the gas to be drawn along the capillary tube by one syringe and collected into the second syringe for analysis. The apparatus is mounted on a back-board about 240×100mm, capillary bore 1mm.  

This apparatus is designed exploring the phenomena of osmosis and concept of osmotic pressure at elementary levels. Comprises a semi-permeable membrane sealing the open mouth of thistle funnel having an indicator tube, which can be positioned in a reservoir. Supplied complete with dropping pipette.  

Glass J-tube formed from 1mm bore thick walled capillary tube, with a brass screw and collar at the end of the longer limb. Used for sampling small quantities of gas held over water (e. G. , in photosynthesis or respiration experiments). A bubble of gas is introduced into the short limb. This is then lowered into reagent solution and the bubble moved back and forth so that reagent diffuses through the end water seal. The change in length of the bubble indicates the amount of gas taken up by the reagent. Use potassium hydroxide for co or alkaline pyrogallol for oxygen. Dimension: long limb - 250mm and short limb - 100mm.  

For recoding the growth of a plant. Plain white paper fastened on the drum with a pencil attached with a thread to the growing tip of the plant, giving magnifications of 5×, 7× and 10× and is mounted on a pillar. The adjustment of pencil pressure is done by a spring. Base size 700 × 200mm (length × width). Operates at 220-240v ac, 50hz. Supplied complete with three core mains cable.  

Takes one revolution every 15 minutes for 24 hours in vertical or horizontal position. The plant is sown in the pot, with clock movement on heavy metal base. With on / off mechanism.  

For demonstrations of heliotropism and geotropism. Germinating seedlings are pinned to the cork table which is rotated by an electric motor at 5 revolutions per hour 220-240v, 50-60hz, 5w. The motor is spindle mounted and may be clamped by a thumbscrew so that the plane of the table can be set at any angle. Slow rotation in the vertical or horizontal planes cancel out the effect of gravity and directional light. An acrylic cover is provided for the cork table to shield the seedlings from draughts. Diameter of cork disc is about 100mm.  

Made of G. I. Sheet or rigid plastic with perforated base.  

For experiments in phototropism with seedlings. Three-chambered case of wood with to accept a variety of shutters. The right-hand chamber has windows in the top and back end, when used with a clear front window, acts as a control chamber. Supplied with opaque shutter, a slot shutter to admit light from one direction only, the clear windows for the control chamber, one orange and one blue filter to show the effect of excluding various parts of the spectrum. Complete with three glass containers for seedlings. Dimensions overall 180 × 530 × 180mm approx. (height × width × depth).  

Made from steel, capable of cutting very thin material fitted with brass pipe having holes.  

Made from steel, capable of cutting very thin material fitted with brass pipe having holes 

Major: for a clean accurate cut secateurs for the professionals. Easily adjustable blade tension. Upper blade easily replaceable. PVC coated soft cushion grip. Size 225mm.  

For accurate cut. High carbon steel blade, with rust resistant coating and easy to clean. Soft touch grip of easy hold and fit to hand. Size 200mm.  

For clean and accurate cut secateurs.
Ergonomically designed handles for a firm, comfortable and less tiring hold.
Practical thumb operated safety lock.
Easily replaceable blade with rust resistant coating.
Size 175mm.  

For planting and transplanting. Made of high quality steel. Wooden or plastic handle.

For planting and marking. Made of high quality steel. Wooden or plastic handle.  

For loosening and aerating the soil without damaging roots. Made of high grade steel. Wooden or plastic handle.  

For rooting out weeds. Wooden or plastic handle.  

Four pieces. Set containing following items – bonsai cutter, small trowel, big trowel rake.  

High carbon steel blade. Comfortable handle grip with lock.  

Trowels and rake made from high quality steel with hard wood handle.  

For tea and coffee garden. High carbon steel knife blade with rust resistant coating. Hard wood finished handle.  

For plants budding and grafting. Stainless steel hardened. All corrosion resistance fitting. Nylon comfortable grip.  

For mushroom cutting and sorting out. Stainless steel rust free blade. Comfortable nylon plastic grip.  

A sturdy spade for the garden or sand pit. Made of high grade steel. Supplied with handle. Size 150mm × 185mm.  

Set of 12 instruments in a fine leather case includes the following hedge shear, pruning secateurs shearing, pruning secateurs cut, pruning saw, weeding trowel big and small weeding fork, weeder, cultivator, budding knife, khurpa medium and small.  

Provides clear inside view of the nucleus, chloroplasts, cell wall, and vacuoles of a plant cell, as well as allows exploring the relationship of a cell to its adjacent cells. This simplified model, enlarged 3,000x, is perfect for introducing students to the basic parts of any plant cell. The one-piece model is mounted on a baseboard with numbered key card.  

Give students a three dimensions view of a plant cell. Included are the nuclear membrane, cell wall, chromosomes, endoplasmic reticulum, chloroplast, large central vacuole mitochondria, ribosomes. The complete model is on a base with numbered key card.  

A highly magnified representation of a typical and generalized plant cell, showing ultra-microscopic details. The structures are shown in section and in relief. The model is mounted on a base.  

This model shows three dimensional view of a plant cell. It includes the nuclear membrane, cell wall, chromosomes, endoplasmic reticulum, chloroplast, large central vacuole, mitochondria, ribosomes. The complete model is mounted on a base with numbered key card.  

Enlarged approximately 4000 times, this realistic model offers a three dimensional view as seen through on electron microscope. Color coded for easy identification. A portion of the wall is removed to show the plasma membrane, vacuoles , plastids , mitochondria, and nucleus. Mounted on a base with numbered key card.  

Simpler and economical version, smaller in size.  

A newly designed model according to recent concept of chromosome changes from the resting nucleus to the formation of four daughter cells. Complete mounted on board with numbered key card.  

For showing the detailed structure of food factory of plants, i. E. , where the photosynthesis takes place. Designed after the latest electron microscopy interpretation of the chloroplast, the 3-dimensional structure is depicted in longitudinal and cross section to show the interior details of the chloroplast comprehensively enlarged about 60,000x; with one quarter of the model is cut away to reveal the inner detail in three levels, which can be taken apart. This two part three-dimensional model of a chloroplast allows easy disassembly and removal of the thylacoids and linking stoma to reveal the interior structure where photosynthesis occurs. The complete model is mounted on a stand with numbered key card.  

Vegetative and reproductive structures of mucor clearly displayed. The large model separates into three parts, showing the mycelium, with fruiting bodies displaying both sexual and asexual reproduction. All parts are enlarged about 250x. The three-piece model is mounted on a base that also features explanatory notes and comes with a study guide identifying twelve structures.  

Polygonum-type, enlarged 300 times. Longitudinal section showing nodes with germinating pollen spores and embryo sac, stamen with pollen in sagittal section. Showing in detail, the microscopic structure on a base with explanatory notes and numbered key card.  

Showing the complete circle of spirogyra life history. Showing all stages as well. Mounted on board.  

This substantially enlarged model of plant vasculature structure of an herbaceous dicot stem section with all the details highlighted in vivid colors, makes it easier to study this model and understand the structure and function of a plant stem. The single, open, collateral, vascular bundle of an herbaceous dicot is shown longitudinally and cross sectioned, clearly showing the elements of the xylem and phloem. The model is mounted on a baseboard with numbered key card.  

Showing all details, the cambium ring is formed but no secondary growth has yet taken place. Very useful and instructive model for the study of epidermis, lentice, cork layer, cork cambium, cortical parenchyma, medullary rays, phloem and internal cambium, xylem etc. Mounted on base with numbered key card.  

Showing transverse, radial and tangential sections and other important structures.  

Showing various tissues vascular bundles in transverse section of the dicot stem (sunflower). Mounted on board with numbered key card.  

Showing cellular structure both in cross and longitudinal section, mounted on board with numbered key card.  

This model shows a cross section of the tissue structure of a garden bean's dicotyledonous stem (phaseolus vulgaris), magnified about 250 times. With numbered key card.  

This colourful model shows the section of monocot stem of corn and clearly illustrates monocot vascular structure. It is magnified about 550x, with the peripheral cross section of zea mays details the xylem and phloem, tracheids, parenchyma, pith, and epidermis. This model is mounted on a base with numbered key card.

Ideal for demonstrating the general monocot. Each cell and tissue type is shown from several aspects with numbered key card.  

Showing various tissues vascular bundles in transverse section of monocot stem of maize, mounted on base with numbered key card.  

This model shows various tissues and scattered bundles in transverse and longitudinal section in maize. The large pitted vessels, spiral and annular vessels are shown very clearly, mounted on board with numbered key card.

Showing section and all vascular bundles details, mounted on board with numbered key card.  

Enlarged about 300 times, showing in longitudinal and transverse section, crown of removable. Dissectible in two part. Mounted on base with numbered key card.  

Showing LS and TS of a root tip with root cap maturation region and root hairs etc. A three dimensional model, mounted on stand with numbered key card.  

Showing internal structure on board with numbered key card.  

Showing details of typical mesophytic leaf. Mounted on plastic base with numbered key card.  

Showing internal structure on board with numbered key card.  

Showing internal structure of typical monocot leaf mounted on plastic base with numbered key card.  

Allows the study of hellebore leaf in great detail. This comprehensive model of ranunculus leaf, enlarged about 700x, shows the microstructure in detail, including a vein, palisade, and parenchyma cells. The cells are sectioned to show the chloroplasts, and the lower surface of the leaf shows the stomata. The model comes mounted on a base with numbered key card.  

Showing internal structure on board with numbered key card.

A portion of leaf attached to the stem is greatly enlarged to show both structures in cross section with exceptional detail. Mounted on base with numbered key card.  

Cut away section shows flow of magma. A truly realistic representation, the hand painted resin model features a vertical section for students to view the path that magma takes on its upward course through the volcano. It is securely mounted on a base.  

Presents cross section of five different structural features. This colorfully painted, molded resin model is actually better than any real-world formations, showing five different structures associated with fault planes and fractures which are practically impossible to find all together in the field.  

This model shows schematically the complicated phenomena, which modified the earth surface. Mounted on base with numbered key card.

The model is showing the layers inside the earth. It is in seven detachable parts which indicate the interior of the earth. The different colours are used to show the various earth layers. When we take off the upper part i. E. , earth's crust, inner core is clearly visible along with all the layers in a single view. All the layers are detachable one by one to find the periphery of each layer. Supplied on support stand.  

Model of natural size dissectible into 10 parts, without sterno abdominal wall but with ribs, sternum, clavicle with their attachments. Thoracic and abdominal organs detachable individually like lungs, heart, stomach, liver, intestine etc. , for detailed study. Half of the skull cap is removable to show brain and its structure, which can be taken out, sectioned head and neck are showing internal organs of that region. Male/female reproductive organs can be easily taken out dissectible into 2 parts. (male or female can be supplied as per customer's requirement). Natural size with numbered key card.  

A very useful and beautiful model of natural size dissectible into 12 parts, without sterno abdominal wall but with ribs, sternum, clavicle with their attachments. Thoracic and abdominal organs detachable individually like lungs, heart, stomach, liver, intestine etc. , for detailed study. Half of the skull cap is removable to show brain and its structure, which can be taken out, sectioned head and neck are showing internal organs of that region. Sexless model with numbered key card.  

Model of natural size dissectible into 10 parts, without sterno abdominal wall but with ribs, sternum, clavicle with their attachments. Thoracic and abdominal organs detachable individually like lungs, heart, stomach, liver, intestine etc. , for detailed study. Half of the skull cap is removable to show brain and its structure, which can be taken out, sectioned head and neck are showing internal organs of that region. Male/female reproductive organs can be easily taken out dissectible into 2 parts. (male or female can be supplied as per customer's requirement). Natural size with numbered key card. Dissectible into 12 parts. Male/female reproductive organs can be easily taken out dissectible into 2 parts. (male or female can be supplied as per customer's requirement). Natural size with numbered key card.

Youth model, about 520mm in height. The brain is fixed in the skull but the skull cap is removed to show the internal structure. Lungs, liver, stomach, intestine etc. , can also be removed to show the internal structure. With numbered key card.  

Without ribs cage. The back depicts the complete vertebral column, spinal cord and its meninges and nerves. Part of neck and back are open to show vertebral column. Mounted on base with numbered key card.  

A reasonably detailed, life size, torso with muscles comprising 17 removable parts and open back. The open part of neck and back depicts the complete vertebral column, spinal cord and its meninges and nerves. All the systems and anatomical structures shown in the model are easily accessible. This model is hand painted and shows the details of internal organs including half of the brain, one eye with muscles and optic nerve, two lungs, half of a kidney, two parts heart, bronchial tree, liver, stomach, small and large intestines, appendix flap, liver with gall bladder and pelvic floor, and first lumbar vertebra. Part of neck and back are open to show vertebral column. Mounted on base with numbered key card.  

Dissectible into 8 parts, showing visceral organs, a very useful model for teaching elementary classes. All parts are detachable to show the body cavity. It is also a sexless model, made of unbreakable material, nicely coloured with numbered key card.  

A newly designed model, showing all internal parts. Dissectible in 8 parts, the head is cut vertically to show internal nasal chamber and details of brain, painted in natural colours, mounted on board with numbered key card.  

This human torso model is dissectable in following parts:- head 2 parts, removable heart 2 parts, lungs 2 parts, stomach, liver with gall bladder, front half of kidney. With numbered key card.  

This torso is especially popular for use by the students for human anatomical studies. It shows the human anatomy in great detail and contains the following removable parts: 3-part head 2 lungs with sternum and rig attachments 2-part heart stomach liver with gall bladder 4-part intestinal tract front half of kidney front half of urinary bladder with numbered key card.  

This versatile, yet economical, torso has all the necessary parts required to study the human anatomy and provides a detailed view of back vertebrae. Features a removable head with nose and mouth cavities, pharynx, skull base with the rear of the skull exposed, and detachable six - part eyeball with optic nerve. Skull has removable four-part half brain with arteries. Lower cutaneous layers are removed on half of the face, exposing mandible, dentition, musculature, nerves, and blood vessels. Removable stomach, liver and gallbladder, small and large intestines, pancreas, and two-part heart with detachable front wall. Neck and back are open from the cerebellum to the sacrum, and the seventh thoracic vertebra is removable. With numbered key card 

Natural size, durable plastic, 85cm high, with interchangeable male and female genitalia. The torso is suitable for demonstrating all the major anatomical parts of human body. It separates into 24 parts as following : 2 - brain eye 2 - lung 2 - heart 2 - stomach liver half kidney 4 - intestine system 4 - male genital insert 4 - female genital insert torso body 

This life sized torso model features 27 different removable parts and open back offering comprehensive and detailed investigation of human anatomy. The model clearly shows the muscular layers, the spinal column, and the nerve branches. All the systems and anatomical structures shown in the model are easily accessible. A sectioned vertebra is removable for further study, revealing the spinal cord in section as well. This accurate model is hand painted to call out the minutest details of internal organs including the small and large intestine with removable appendix, two-part stomach, pancreas with spleen, liver with gall bladder, half of a kidney, four-part lungs, two part heart, trachea, aorta with oesophagus, one eye with optic nerve, and half of the brain. It also includes four-part interchangeable male and female reproductive systems. The torso is mounted on a base with numbered key card.  

This sophisticated model shows the deep and superficial musculature in great detail. The extraordinary accuracy makes this masterpiece a unique tool for instructions even in large lecture halls. Following parts can be removed and studied in detail: skull cap 6-part brain eye ball breast and abdominal wall both arms 2-part larynx 2 lungs 2-part stomach liver with gall bladder kidney whole intestine system bladder half 2-part penis 10 muscles 

Muscle anatomy depicted in detail, in a convenient size. One- quarter life size, and a fraction of the price of full-size models, the mini muscular figure accurately illustrates the structures of all the superficial muscles of the human body. The chest plate can be removed to view the internal organs, and one side includes a female mammary gland. With numbered key card.  

Dissectible in three parts, life size model, mounted on board, the brain is dissected into 2 parts and can be taken out to show the important parts of skull and cranial nerves etc. With numbered key card.

Life-sized and highly detailed, this model of the human brain is sagittal sectioned; both halves can be separated into frontal with parental lobes, temporal with occipital lobes, half of the brain stem, and half of the cerebellum. The eight-piece model rests in a plastic base and can be removed for closer examination. With numbered key card.  

This brain is medially divided, perfect for beginning studies because of its affordable prices. Delivered on removable base with numbered key card 

This brain is medially divided, the right half can be disassembled into frontal with parental lobes, brain stem with two part temporal and occipital lobes. Complete on removable base with numbered key card.

This brain is medially divided, the right half can be disassembled into frontal with parental lobes, brain stem with two part temporal and occipital lobes. Complete on removable base with numbered key card. Available in four parts.  

A medially divided brain, perfect for beginning studies because of its affordable price. Delivered on removable base with numbered key card.  

Ideal for demonstrating the anatomy of the brain and how blood is transferred to and throughout it, this life-size, realistic model can be studied both externally and internally for a through understanding of the structure and path of blood vessels. The model is sagittally sectioned, with both halves separable into four parts: the frontal with parietal lobes, temporal with occipital lobes, brain stem, and cerebellum. The basilar artery is also removable. The model rests on a base and can be removed for closer examination. With numbered key card.  

The life-size brain and head can be examined as a cohesive unit, or the many sections can be studied individually, illustrating the relationship between the brain and the skull. When the brain is removed it reveals the detailed vascular anatomy of the base of the skull, including the dura mater, basilar artery, and twelve pairs of cranial nerves. The brain itself is sagittally sectioned; each half further separates into the frontal with parietal lobes, temporal with occipital lobes, brain stem, and cerebellum. The ten-piece model is mounted on a base with numbered key card.  

This brain model shows the brain arteries, separate altogether into 9 parts but mounted in normal position on a base with numbered key card.  

This medially divided deluxe brain model shows the brain arteries as well as the removable basilar artery. Both halves can be disassembled into: frontal with parietal lobes temporal with occipital lobes half of brain stem half of cerebellum on removable base with numbered key card.  

This brain model shows the brain arteries, separate altogether into 9 parts but mounted in normal position on a base with numbered key card available in eight parts.

An enlarged and very detailed section through the right half of the brain, including a portion of the skull. The pi mater has been removed. This model is double sided and finely coloured. One surface is on the median line, including a section of the falx cerebri. A sagittal cut on the reverse exposes the lateral ventricle with 49 references on.  

This life-size 6-parts head features a removable 4-parts brain half with arteries. The eyeball with optic nerve is also removable and one side exposes the nose, mouth cavity. Pharynx, occiput and skull base. With numbered key card.  

This life-size 6-parts head features a removable 4-parts brain half with arteries. The eyeball with optic nerve is also removable and one side exposes the nose, mouth cavity. Pharynx, occiput and skull base. With numbered key card.   but showing muscles of face to study the same. This model shows the right and left side, separate to reveal the major muscles, nerves and blood vessels of the human face.  

2 relief models on baseboard. The frontal section runs through mouth and nose cavity and both orbits. It shows all relevant structure of the human head in detail. Natural size, not detachable, on board with numbered key card.

A relief model on baseboard, showing all internal organs. Natural size, showing median section of brain, nose, mouth and pharynx, larynx and vertebral column of the neck. With numbered key card.  

Sagittally sectioned to display the external and internal details at the same time, the life-size model beautifully details the surface musculature, veins, arteries, and nerves on the right side, and the details of the brain and associated structures such as the ventricles, brain stem, medulla, and more on the left. The model also shows a sectioned vertebral column and nerve cord, tongue, sinus cavities, oesophagus, and larynx. The model is mounted on a stand and can be removed for closer examination. With numbered key card.  

2 relief models on baseboard. The frontal section runs through mouth and nose cavity and both orbits. It shows all relevant structure of the human head in detail. Natural size, not detachable, on board with numbered key card.  

A relief model on baseboard, showing all internal organs. Natural size, showing median section of brain, nose, mouth and pharynx, larynx and vertebral column of the neck. With numbered key card.  

Sagittally sectioned to display the external and internal details at the same time, the life-size model beautifully details the surface musculature, veins, arteries, and nerves on the right side, and the details of the brain and associated structures such as the ventricles, brain stem, medulla, and more on the left. The model also shows a sectioned vertebral column and nerve cord, tongue, sinus cavities, oesophagus, and larynx. The model is mounted on a stand and can be removed for closer examination. With numbered key card.  

The left half of this life-size model in mid-sagittal section shows the muscles, with nerves, vessels and bony structure, and contains a removable brain half. The half is mounted on a detachable neck part which is sectioned both horizontally and diagonally. Supplied on baseboard with numbered key card.  

With unparalleled surface anatomy, removable parts, and nearly 200 structures to examine and identify, this lifelike model can enhance your lessons on the nervous system and human musculature. The interior structure of the skull, as can the brain, which can be further dissected into two parts. The four-part model is mounted on a base and can be removed for closer study. With numbered key card.  

Enlarged approximately 2500 times, showing neuron structure clearly based on the latest electron microscopy. Showing medulated nerve fiber, axon, myelin sheath and nodes of ranvier etc. , mounted on base with numbered key card.

This model shows the central nervous system. It contains set of two models. The spinal cord section, details the white and grey matter, sulci, ganglion, and fissures. The model of the spinal cord with nerve branches, displays the ventral and dorsal roots of the spinal nerve. The tow models are mounted on a common base, and a transparent case is included for protection. With numbered key card.  

The upper thoracic spinal cord is rendered in longitudinal and cross section, and enlarged 6x, to show dorsal and ventral nerve roots with ganglia, as well as the blood supply. Each type of nerve has been painted a different color: afferent visceral nerves - green ; afferent somatic nerves - yellow; efferent visceral nerves - red; and efferent somatic nerves - black. The model is mounted on a base, which features a circuitry diagram with numbered key card.  

This model shows a schematic representation of the central and peripheral nervous system. An excellent model to study the structure of the human nervous system. With numbered key card.  

This model has been designed for the help of medical doctors to show the cerebellum, mounted on base with numbered key card.  

This model has been designed for the help of medical doctors to show the pituitary gland and hypothalamus, mounted on base with numbered key card.  

Even - piece model provides exceptional detail of the human eye. Detailed model enlarged 3x actual size. Removable upper half of the sclera with cornea and eye muscle attachments, both halves of the choroid coat with iris and retina, lens and vitreous humour. Mounted on durable base with numbered key card.  

5 times enlarged, dissectible into 6 parts, sectioned horizontally, upper half of the sclerotic membrane, choroids membrane (2), retina with vitreous humor, lens, lower half of the sclerotic membrane are clearly shown with numbered key card.  

5 times enlarged, dissectible into 6 parts, sectioned horizontally, upper half of the sclerotic membrane, choroids membrane (2), retina with vitreous humor, lens, lower half of the sclerotic membrane are clearly shown with numbered key card.  with orbit.

Ideal for demonstrating the relationship of the eyeball to the associated musculature within the orbit, the 5x-enlarged model includes eyelids, the bony orbit with intraocular muscles, a tear duct, and lachrymal gland. The eye itself is horizontally sectioned, and the sclera with clear cornea and muscles are removable. The two part choroid with iris, retina, and optic nerve; clear lens; and clear vitreous humor are also all removable. The eight piece model is mounted on a base with numbered key card.  

Ideal for demonstrating the relationship of the eyeball to the associated musculature within the orbit, the 5x-enlarged model includes eyelids, the bony orbit with interocular muscles, a tear duct and lachrymal gland. The eye itself is horizontally sectioned, and the sclera with clear cornea and muscles are removable. The two part choroids with iris, retina, and optic nerve; clear lens; and clear vitreous humor are also all removable. The eight - piece model is mounted on a stand with numbered key card.  

Ideal for demonstrating the relationship of the eyeball to the associated musculature within the orbit, the 5x-enlarged model includes eyelids, the bony orbit with intraocular muscles, a tear duct and lachrymal gland. The eye itself is horizontally sectioned, and the sclera with clear cornea and muscles are removable. The two part choroids with iris, retina, and optic nerve; clear lens; and clear vitreous humor are also all removable. The eight - piece model is mounted on a stand with numbered key card.  mounted on base.  

This removable, 4x-enlarged, horizontally sectioned eye features a two part choroids with iris and retina, the clear plastic lens and vitreous humor. The tear duct and the interocular muscles are also shown. The seven-piece model is mounted on a base with numbered key card.

One side of this 6x model shows the eye socket with a sagittal cut away, while the other side of the model shows the outside of the eye and all the muscle attachments, as well as illustrations depicting how the eye focuses. The cut away is encased in a clear protective covering and two separate insets show the fine structure of the retina as seen with an electron microscope. This model comes attached to a stand with a base with numbered key card.  

Enlarged approx. 6 times, 5 parts, on one side the model s h o w s the eye socket with a sagittal cutaway. In addition the black ground to the eye and the muscles of the eye are shown separately. On the other side of model, the eye ball with its muscles are shown.  

The model illustrates the microscopic structure of the retina with choroid and sclera. The left block-like, layered side of the model side shows the complete structure of the retina including the supplying vascular layer and parts of the sclera from a light microscopic view. The right part of the model is a sectional enlargement. It shows the microscopic structure of the photoreceptors and the cells of the pigmented layer

Four times actual size model supports detailed study of the human ear. Petrous portion of the temporal bone section of the auditory canal is removable. Labyrinth can be extracted and opened. Tympanic membrane with malleus and incus can be removed and separated into six parts. Mounted on a sturdy base includes comprehensive key card.  

This version is a whopping 5 times life-size for easy viewing from anywhere in the classroom! Representation of outer, middle and inner ear. Removable auditory osicles and labyrinth with cochlea and vestibulocochlear nerve. Mounted on base with numbered key card.

Showing approximately 4 times enlarged. The petros portion of the temporal bone section of the auditory canal is removed. The tympanic membrane with malleus and incus are also removable, dissectible into 3 parts, mounted on base. Representation of outer, middle and inner ear, removable eardrum with hammer, anvil and stirrup, additionally with two removable bone section to close the middle and inner ear with numbered key card

Approximately 5 to 6 times enlarged, on board with pinna, dissectible into 4 parts. The mechanism of hearing can be easily explained with the numbered key card.

This 2x model shows a cross section of the cranium so students can see how various structures are placed inside the head. It features an elastic epiglottis to show the relationship of the nasopharynx structures. The model is mounted on a base with numbered key card.  

With detachable teeth model, dissectible into 2 parts, mounted on base. With numbered key card.