Entomological Equipments

For pinning of insects both top & bottom insides. Teakwood frame with sunmica top & plywood bottom is finished in lacquer polish. Top & bottom lined with 8 mm thick EVA sheet. Inside glazed white with art paper. Raised wooden wall with holes for insecticide, inside bottom to make box air- tight and pest proof. Fitted with brass hinges, index card holder and clips.

• Size 53 x 45 x 9 cm. 
• Size 45 x 30 x 7.5 cm. 
• Size 38 x 25 x 7.5 cm. 
• Size 30 x 23 x 7.5 cm.  

For pinning of insects only inside bottom. Specifications similar to but with glass in wooden frame on top.

• Size 53 x45 x 9 cm. 
• Size 45 x 30 x 6.5 cm. 
• Size 38 x 25 x 6.5 cm. 
• Size 30 x 23 x 6.5 cm.   

For keeping insect storage & display showcase of size 45 x 30 x 6.5 cm . Cabinet frame of play board finished with laminated sheet. Hinged door is provided with look and handle and is lined with velvet.

Provided with 53 x 45 x 9 cm. Size drawer for keeping insects. Drawer of MDF with plywood bottom and removable glass top is lined with 8 mm thick EVA sheet and is glazed white from inside . Wooden batons with provision for insecticide fitted inside drawer. Glass top frame designed to make box airtight and pest proof. Fitted with index card holder and puller knobs. Finished in lacquer polish. Cabinet frame of plyboard finished with laminated sheet. Hinged door is provided with lock and handle and is lined with velvet.

• Cabinet with 12 drawers. 
• Cabinet with 24 drawers.  

Board adjustable along the support to obtain desired width for different size Insects. Board top & groove fitted with 8 mm thick EVA sheet. Groove adjustable from 0 to 12 mm with the help of brass fly-nuts. Material used is teak wood and finished in spirit polish.Size 35 x 12 cm.

A) Insect Collecting Net With Aluminum pipe handle with fine rubber grip at end,length of handle 75 cm. 75 cm long net fitted in ring through 5 cm wide cloth rim. Dia of bag at free end 25 cm. Ring dia 30 cm.

B) Insect Collecting Net With Iron Handle : Like but with iron, chrome plated, pipe handle. 
 
C) Insect Collecting Net With Wooden Handle : Like but with wooden, spirit polish handle.  

D) Spare net bags for insect collecting nets.  

Removable, rigid D-shape frame 30 cm across, mesh bag with thick cloth rim. 120 cm iron pipe, chrome plated handle with rubber grip at end.

Made of No. 12 standard silk bolting cloth, 125 mesh per sq. Inch. 89 cm long net suspended by muslin reinforcement to a 24 cm dia ring. Three braided leaders attached to swivel front. Tail of bag with 2 cm. Opening closed by tying cloth tape for placing glass vial.

A) Insect Light Trp With Electric Bulb: Made  of mild steel with a box at the bottom for placing killing bottle / tray. Length of funnel 30 cm, diameter of funnel at the tail end 5 cm, size of box40 x 40 x 25 cm., Funnel coming into box for convenient collection of trapped insects into the tray. Provided with a shade to cover th whole equipment. Supports for stout construction and 5 meter long electric cord.

B) Insect Light Trap With Florescent Tube : Like but provided with 10 watt electric florescent tube, instead of electric bulb . 

C) Insect Light Trap With U.V. Tube : Like but provided with 15 watt UV tube.  

The trap is a barrel shaped body with both of its ends open. One of the ends is fixed with a hollow truncated cone which nests inside of the body of the barrel while other end of the barrel opens into a broad sleeve, which is kept tied from the other end thus forming a sac like structure. The narrow opening of the cone remains free in the core of the barrel. Trap is mounted on an stout upright stand with a telescopic arrangement for adjusting the height of the trap. Provided with ball bearing for free movement of trap in wind direction.

Conical net fixed in double rings to suspended upside down. Another double ring provided in centre with wires to suspend sweet material to attract fruit flies. Thick polythene sheet with a 8 cm hole fixed in lower ring. Optional umbrella shade can also be provided at extra cost.

Made of mild steel with a box having holes in bottom. Funnel over box to guide trapped Moth into the box. Tray provided under the box for collection of trapped moth. Mercury bulb provided on top of the funnel. Hanging arrangement for on-field use.

Funnel tip provided with wire mesh over which wet soil containing insects is kept Electric bulb provided to dry the soil. A bottle is provided below the funnel for collection of insects.

Aluminum angle framework supported on wooden batons. Fine mesh provided on sides and top. Hinged door provided with clips for tight closing. Wooden bottom covered with sunmica from inside.

A) Size 15 x 15 x 15 cm.
B) Size 20 x 15 x 15 cm. 
C) Size 25 x 20 x 20 cm. 
D) Size 20 x 20 x 20 cm. (Folding Type)  

 

Made of aluminum angle framework supported on wooden batons. Provided with fine wire mesh on sides. Wide wire mesh partition in the center to facilitate mosquitoes passing into rats portion. On side of mosquitoes a round opening with black cloth sleeve and on rats side a sliding window provided in center.

Size 45 x 30 x 30 cm.

Teakwood frame finished in spirit polish. 4 mm thick glass on top and fine wire mesh on three sides. Front with 13 cm rounded opening in th centre with black cloth sleeve. On right side a plumbiv pipe fitted for collection of flies.

Size 45 x 45 x 45 cm.

Teak wood frame with plywood top & bottom is finished in spirit polish. Top and bottom lined with foam to protect specimen tubes from jerks. Fitted with hinges, clips and index card holder. Hard board sheet with 204 apertures for ½” dia tubes or 150 apertures for 3/4” dia tubes fixed inside.

Insect Specimen Tube box
Teakwood frame with plywood top & bottom is finished in spirit polish. Fitted with hinges, clips and index card holder. Hard board sheet with 20 apertures for 75 x 25 mm specimen tubes fitted inside. 

Insect Specimen Tube Cabinet  
Capacity 500 specimen tube of 75 mm x 25 mm size. Cabinet frame of plyboard finished with laminated sheet. Hinged door is provided with lock and handle and is lined with velvet. Provided with 5 drawers each for 100 specimen tubes.  

A) Size 100 x 60 x 60 cm.
B) Size 70 x 50 x 40 cm.  

A) Size 100 x 60 x 60 cm.
B) Size 70 x 50 x 40 cm.  

Framework of seasoned teakwood. Front door and top provided with non rattling glass and back and two sides with nylon wire screen supported by fine wire mesh mosquito proof. Wooden base covered with sunmica from inside

Size 45 x 45 x 65 cm.

Made of MDF planks. Top lids fits well in the main box and detachable. Lid provided with 20 mesh iron wire-mesh secured with beeding. Provided with handle on sides. Well finished.

Size 43x23x12 cm.

Sterilization chamber made of mild steel and is divided into two equal parts by horizontal partition. Each partition provided with a drawer which has a semi circular base. In the inner surface of the semicircular base the drawer is provided with longitudinal flanges of 2mm thick and GCM apart. These flanges prevent the egg bearing cards to glide one over the other from the curve surface. The ceiling of each drawer is provide with a UV tube light Each tube light is connected with a timer.

A)  Capacity 150 cards  
B)  Capacity 50 cards  
C) Capacity 25 cards  

Comprising of a tubular column the upper end of which is closed with a perforated lid. The perforation is provided with a tube connected to vacuum cleaner. A special type funnel is provided at the lower end of the column. A flexible tube is inserted in the column. On switching on the vacuum cleaner. the air is sucked in the column from funnel stem and the flexible tube. The eggs mixed with scales are sucked in the column through flexible tube. The scales being lighter are lifted and sucked into the vacuum cleaner while the eggs being heavier do not reach upto the upper reaches of the column hence fall down when the vacuum cleaner is switched off.

For Keeping 4----- frames of standard size. Provided with glass on both sides covered with detachable sliding wooden covers. Hole in base allows bees to move freely.

Especially designed for study of Zoological specimens, Botanical specimens and assembly and inspection in industrial purpose. The magnifier is fitted with optical glass lens dia M. 145 mm and Magnification 3 x mounted on stout stand, adjustable vertically and horizontally, allows the lens to swivel in all directions. The cast iron base of 200 x 200 x 75 mm provide extra stability to the stand during use. The circular flourscent lamp for giving cool shadow free and uniform illumination. Operated on 220V. Total height of the stand is 440 mm and linear movement upto 220 mm.