Advanced Technocracy Inc.
Grain Market, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Heat Transfer Laboratory Instruments

Our clients can avail from us wide range of heat transfer of laboratory which include heat conduction in solid, heat conduction in glasses and liquids, shell and tube exchanger. All these equipment are highly capable and offered at market leading rates.

Heat Transfer Lab Equipments, Heat Transfer Equipments Suppliers, Heat Transfer Lab Instruments India, Heat Transfer Lab Equipments Manufacturers, Heat Transfer Lab Equipments Exporters India, Heat Transfer Labs Equipments, advanced technocracy inc.

REQUEST CALLBACK
Ask Latest Price

Free and forced convection unit

Description & Specification:

Free And Forced Convection Unit This experimental unit is designed for free and forced convection. Air is fed through a duct and heated at heater elements with different shaped surfaces. Three interchangeable heater elements are provided. A fan can be switched on for experiments on forced convection. The temperature and air velocity are measured using sensors..

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Glass Shell and Tube Heat Exchanger

Our highly talented team is offering Glass Shell & Tube Heat Exchanger of fine quality. They are used in various laboratories to perform various duties that include evaporation, condensation, heating and cooling. The glass tubes are sealed into PTFE tube that permits easy replacement and cleaning. Additionally, the overall heat transfer in this exchanger is about three times greater than coil type heat exchangers.

 

Features:

v Easy replacement of tubes for cleaning

v Available in wide range of HTA

v Excellent heat transfer

v Easy to install

 

Advantages Over Conventional Coil Type Heat Exchangers :

The overall heat transfer coefficient in shell and tube heat exchanger is about 3 times higher than in coil type heat exchanger.

The pressure drop in shell and tube heat exchanger is minimal compared to 2-3 kg/cm2 in coil side of coil type heat exchanger.

For requirement of higher heat transfer areas shell and tube heat exchanger is the only alternative.

 

Features:

The glass tubes are sealed individually into PTFE tube sheet with special PTFE sockets and packing. This unique ferrule type sealing arrangement permits easy replacement and cleaning of tubes. Baffles on shell side ensure improved heat transfer by increased turbulance.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Heat conduction in gases and liquids

Description & Specification:

This benchtop unit enables experiments to be performed on steady-state thermal conduction in liquid and gaseous materials. It comprises a cylindrical heat exchanger with a heated inner cylinder made of aluminium and a water-cooled jacket. The medium for the experiment is fed through a gap. The gap between the two elements was selected so that the transfer of heat due to convection can be ignored. Due to the low temperatures and the polished surfaces, the radiation portion of the heat transfer is also negligible. Thermocouples measure the temperature difference. A supply of cooling water is required..
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Shell and tube heat exchanger

Description

  • A miniature shell and tube heat exchanger for use with an Heat Exchanger Service Unit.
  • Comprises an outer shell and seven internal tubes. There are two transverse baffles inside the shell.
  • Four temperature sensors are supplied in tappings at fluid inlets and outlets.
  • The heat exchanger is constructed from stainless steel tube and clear acrylic. It is mounted on a PVC baseplate which is designed to be installed on the plinth of the Heat Exchanger Service Unit without the need for tools.
  • The stainless steel tubes can be removed from the heat exchanger for cleaning.
  • A comprehensive instruction manual is included.

Technical Details:

  • Hot fluid in the inner tubes and cold fluid in outer shell to minimise heat loss from the exchanger without the need for additional insulation.
  • Seven stainless steel tubes, 6.35mm OD.
  • The outer annulus, end caps and baffles constructed from clear acrylic to allow visualisation of the heat exchanger construction and minimise thermal losses.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Specifications:

A fully instrumented bench top pool boiling heat transfer unit using low-pressure non-toxic fluid with water-cooled cylindrical glass condenser.
A bench mounted pool-boiling unit comprising a thick walled glass cylinder with electric heater and water-cooled condenser coil. Operates with ozone friendly, low pressure, non-toxic fluid refrigerant.
Internal electric and mechanical safety devices to allow for unsupervised operation by students.
Instrumentation fitted to enable measurement of heat input, surface, liquid and vapour temperatures and condenser water flow rate and temperatures.
Supplied with a detailed experimental operating and maintenance manual giving example experimental results and sample calculations.

Experimental Capabilities:

  • Visual demonstration of convective, nucleate and film boiling.
  • Study of the heat flux and surface heat transfer coefficient at constant temperature.
  • Investigation of the effect of pressure on critical heat flux.
  • Study of filmwise condensation and condenser overall heat transfer coefficient.
  • Investigation of the pressure- temperature relationship of a pure substance, and the effect of air in a condenser.
Demonstration of:
  • Liquid carry over or priming in boilers.
  • Law of partial pressures
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
The Ice Plant Test Rig designed by us works on simple vapor compression refrigeration cycle and uses A as a refrigerant. The system is designed such that students can observe and study ice formation process without any confusion. It is also useful to understand working of vapor compression system, due to its sophisticated yet simple performance and controls.
Attributes

• All the parts are visible and working can be easily understood
• Eco-friendly
• User friendly
• Makes the process of testing easy and accurate

List of Experiments

• To Study Various Components and Controls Used in Ice Plant
• To Evaluate Capacity of the Ice Plant
• To Calculate C.O.P. of the System
• To Plot System Performance On P-H Chart

Rating Conditions

• Ambient Temperature = 350 C
• Atmospheric Pressure = 1.01 Bar
• Suction Pressure = 10 Psig
• Discharge Pressure = 180 Psig
• Evaporation Temperature =- 140 C
• Discharge Temperature = 550 C

Specifications
  • Compressor: Hermetically Sealed Compressor. Capacity 1/3 Ton, Kirlosker Make
  • Condenser: Water Cooled Type Shell And Coil Condenser With Refrigerant Inside The Tube
  • Digital Voltmeter: 0-300 V
  • Digital Ammeter: 0-5 Amp
  • Expansion Valve : Capillary Tube, Compatible Capacity
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
We specialize in offering a qualitative range of Cavitation Demonstration Unit. Manufactured from finest quality components and raw material, offered products are acclaimed for their optimum quality. Offered products are exclusively used in various industries. Our offered products can be availed by our valued clients at pocket-friendly prices.

Specifications
  • Brand Name: ATICO
  • Weight: Weight
  • Condition: New
  • Color: White, Blue, Yellow, Clear
  • Efficiency: 80%

Features:

  • Shear strength
  • Precise design
  • Fine finish
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Orifice and jet velocity apparatus.

In the Orifice & Free Jet Flow accessory, a constant head tank is fed with water from the Hydraulics Bench.
The orifice is installed at the base of this tank by means of a special wall fitting which provides a flush inside surface. The head is maintained at a constant value by an adjustable overflow and is indicated by a level scale. A series of adjustable probes allow the path followed by the jet to be ascertained. Adjustable feet permit leveling.

Specifications:
  1. Orifice diameters: 3.0mm and 6.0mm
  2. Jet trajectory probes: 8
  3. Max. constant head: 410mm
  4. Function: Prostate Treatment Machine
  5. Type: Trolley type
  6. Power: Electronic
  7. Usage: Auto Testing Machine
  8. Size: As per requirement
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Technical Description

A Plexiglas cylinder is equipped with an adjustable overflow and scale which enables the height of the water column to be set and read accurately. 2 types of outlet nozzle can be compared. The trajectory of the jet can be traced using adjustable probes and recorded on a white panel.

The water supply is provided either from the laboratory mains (closed water circuit).

Specifications

  • Function: Prostate Treatment Machine
  • Type: Trolley type
  • Power: Electronic
  • Usage: Auto Testing Machine
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Steam Boiler Trainer

Steam Boiler Trainer efficiently provides hot water for process heat and building heat typically used throughout industry. This trainer teaches technicians the skills they need to select, operate, install, maintain and repair basic steam systems. The Boiler Trainer includes Electrical Fault Package with six instructor insertable faults.

 

Brand ATICO

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Convection Heat Transfer Demonstrator

Convection Heat Transfer Demonstrator permits student investigation of the phenomena of natural (free) and forced convection. Electrically heated test sections are utilized to transfer heat to both still and moving air. The unit allows the student to determine the overall heat transfer coefficient, convective heat transfer coefficient, heat transfer rate, Nusselt Number and Stanton Number.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Solar Heat System Trainer

Solar Heat System Trainer is an actual solar hot water heating system. System components include one traditional style solar collector and one vacuum tube solar collector, circulation pumps, storage tank, heat exchanger, air separator, air handler, solar heating coil, automatic air vents, thermostat, and a control panel with sensors.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Wind Powered Generator

Wind Powered Generator has been designed to provide the student with the basic understanding of how wind generators function as an alternate source of energy. This system consists of a wind source, a four bladed DC wind generator, control panel and base assembly.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Two Phase Heat Transfer Unit

  • To visualize the process of nucleate and film boiling on the heater and condensation on water cooling coils.
  • To calculate Critical Heat Flux during process
  • To calculate heat release during condensation
  • The experiments can be conducted at various values of input & calculation can be made accordingly
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
We manufacture AM FM Radio Receiver using cutting-edge technologies. The AM/FM Radio Trainer Kit has components placed over their corresponding symbols in the schematic drawing on the surface of the printed circuit board thereby maximizing the learning process and explain theory of operation of the radios. The radios are constructed in sections with each section being completely tested before moving on to the next, reducing difficult troubleshooting associated with some other kits. Trainer includes a high quality printed circuit board with schematic printed on the surface. The manual is easy to understand and assumes no previous electronics knowledge. The trainer kit of AM FM Radio Receivers form a Superheterodyne receiver of standard AM (amplitude modulation) and FM (frequency modulated) broadcast frequencies.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Reflex Klyston Microwave Test Bench

Experiments:
  • To Study the Characteristic of Reflex Klyston.
  • To Study the frequency, guide wavelength & free space wave length.
  • To measure SWR & reflection co- efficient.
  • To measure impedance of a load.

Test Bench Specifications:

Component Name

Qty.

Klystron power supply

1

Klystron Tube

1

Frequency Meter

1

Slotted Section

1

Detector Mount

1

Matched Termination

1

Wave Guide Stands

1

BNC Cable

1

Fixed Short

1

Klystron Mount

1

Isolator

1

Variable Attenuator

1

Tunable Probe

1

Movable Short

1

VSWR Meter Solid State

1

SS Tuner

1

Cooling Fan

1

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Objective:- To study charge of an electron using short solenoid method.
Features:-
Kit Comprises of Low Voltage DC Power Supply unit with Filament Voltage & Solenoid Current controls. Two meters are provided for Anode Voltage controls. One Solenoid Unit Comprises of one Solenoid mounted on wooden stand & Valve 41 is Kept in the Solenoid pipe.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Assembly & Maintenance Exercise Refrigeration

Technical Description

Using, students can develop skills on how to undertake a complex engineering project. The skills developed are the planning, execution and checking of assembly; commissioning, and maintenance operations. The assembly covers installation of the refrigeration components: Installing the low-pressure and high-pressure switches, the expansion valve and the refrigeration circuit piping. The pipe connections are not soldered, but bolted. The electrical installation includes wiring and connecting up all units and switching elements. The tool set is required to assemble the unit. The refrigeration charging and evacuation station is required for commissioning the unit.

The fully assembled presents a fully functional temperature-controlled cooling system with cooling chamber and electric thermostat. Repeated assembly and disassembly is possible.

 

The experiment is mounted on a workbench, with drawers to hold components and tools. The assembly panel and refrigeration chamber are mounted on a frame. The frame, condenser set and switch box are permanently bolted to the workbench work surface. The refrigeration and electrical components are attached to the aluminium assembly panel.

 

The fully assembled presents a real, fully functional temperature-controlled cooling system with cooling chamber and electric thermostat. The system is supplied in kit form. 

 

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Young Modulus Apparatus for physics lab.

Technical Description

This apparatus is capable of greater sensitivity and accuracy. It consists of two iron frames connected by a link. The frames are fitted with self centering chucks. An accuracy cut micrometer screw to read to 0.01mm and main scale of

0-10mm is fitted in one frame. One end of a sensitive spirit level is pivoted to one of the frames and the other end rests on the point of a micrometer screw fitted on the other frame.

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
We offer BOD Incubator that are available in different standard sizes and wide temperature range. bod incubator is mostly used for drying; antibody & other bacteriological tests; crystallization & hydroxy steroid incubation studies, paraffin embedding, slide staining and other microbiological tests at constant temperatures. The used categories include chemicals & bio-chemicals; pollution control & monitoring; research & development and quality control labs, pharmaceutical laboratories, microbiological & biotechnology labs, college & classrooms.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of School Science Lab Equipments

Description

One cylinder, 4 cycled and double valve system gas engine, to show operations like intake, compression, explosion, exhaust, spark and others, mounted on wooden base with spark plug and battery.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Description & Specification:

The benchtop unit mainly comprises a vertical air duct. A fan draws the air through the duct. Interchangeable heaters dissipate heat directly into the airflow. The following heater elements are included: pipe, pipe bundle and finned pipe. To investigate the effect of the flow in the pipe bundle, the heater insert can be positioned in different pipe rows. Electronic sensors are used to take measurements. The measured values are indicated digitally on the display unit and transferred directly to a PC. A data acquisition card for the PC with easy to use software is included. The software enables, among other aspects, the measured data to be recorded and stored. The flow rate, Reynolds and Nusselt numbers are calculated, temperature-time relation and the dependence of the Nusselt number on the Reynolds number can be demonstrated graphically..

Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Body made out of thick mild steel finished with powder coating.Heavy duty motors for suitable capacities are provided for long time continuous operation.Fixed speed and variable speed models are offered.Platform is provided with lotus type clamps or rubber discs to hold flasks.

Features:
  • RPM Range-upto 200RPM.electronic control 0-60min.timer.
  • Workable on 220V AC 50Hz.Single Phase.

Platform size in cm. Holding Capacity Motor Type
  • 45x45cm. 36 Flasks of 50ml. PMDC
  • 45x45cm. 25 flasks of 100l. PMDC
  • 45x45cm. 15 flasks of 250ml. PMDC
  • 55x55cm. 25 flasks of 250ml. PMDC
  • 65x65cm 36 flasks of 250ml. PMDC
  • 105x105cm. 64 flasks of 250ml. PMDC
  • 105x105cm. 81 flasks of 250ml. PMDC

Optional(Extra Cost)
  • 1. Digital RPM Indicator
  • 2. Digital Timer(0-99 minutes).
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Laboratory hot plates are available in round and rectangular shapes.Body is fabricated out of thick mild steel duly finished with powder coating.heater made of kanthal wire to operate on 220V AC 50Hz single phase.Heat is controlled by three point ritary switch with an indicator lamp fo mains etc.

SizeTop
8"DiaRound
12"X10"Rectangular
16"X10"Rectangular
18"X12"Rectangular
24"X18"Rectangular

Optional(Extra Cost)
  • 1. Energy Regulator.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Senior Rotary Microtome is a higly versatile sectioning device suitable for medical institutions, reearch & Pathological Laboratories. This microtome has special application for cutting these sections of histopathological specimens. It is ideal for those who want to avail advantages of a Rotary Microtome at a moderate cost.The entire mechanism stands on a heavy cast iron base ensuring stability and rigidity, its compound slide ways of critical tolerance guide the specimen block. The metal hinged cover housing protects the internal machanism against dust and paraffin waste, it can be conveniently opened for resetting, cleaning and lubricating. The microtome is driven by a handle which can also be locked. Cutting sections are obtained in different thickness by machanically operated crank through a lnurled in front of the instrument. The knurled knob is graduated in microns for feed setting and ready reference detent click action ensures positive adjusments in one micron increment. The knife holder unit is equipped with a rotating knife clamp to adjust desired angles for best sectioning. It as forward and backward movement to ensure contact of specimen with the knife and lateral movement to get maximum use of knife edge.Smooth & accurate specimen movement is achieved with the time proven operating principles of the feed mechanism. Travel is entirely independent to the vertical movement of the specimen block.When the feed limit reaches to an end point, it disengages itself. To bring the feed screw back, the vice is pressed slightly and the main gear wheel is turned clockwise till the screw reaches its starting position. All parts are fabricated from selected alloys and the Microtome knife is manufactured from fine grain steel tested to maintain optimum sharpness strength.

  • Feed Adjustment 1-25 Microns
  • Minimum Thickness One microns
  • Total Feed execursion 28mm
  • Objecct Holder(3Nos.) 1 Set
  • Knife 120mm in a box 1 Nos.
  • Honing Stone 1 Nos.
  • Lubricating Oil 1 Bottle
  • Dust Cover 1 Nos.
  • Operating manual 1 Nos.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Soxhlet Extraction Unit with Energy Regulator:

These are ideal heaters for extractors of soxhlet & other types. This apparatus is suitable for heating soxhlet flasks of 50-500 ml and consists of two vertical & one horizontal rod with adapters, mild steel sheet housing & screws to hold the flasks. These work on 220/230 A.C.

 

Models:

  • Unit of 3 test Mantle Type (Without Glass parts & Clamp)
  • Unit of 6 test Mantle Type (Without Glass parts & Clamp).
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Product Details:
BrandATICO

Our company has achieved laurels in offering Glass Jar for Museum Specimen to the clients. This product is broadly demanded in various clinics, Laboratory and hospitals. Offered range is designed by utilizing superior quality material at well equipped production unit. Glass Jar for Museum Specimen is also customized accordance with the customer's specific specifications and requirements. This product is available in various designs, sizes. Offered range is widely appreciated across the nation for excellent finish, leak proof with cover and knob.

Features:

  • Stain free glass
  • High transparent
  • Low maintenance
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
Hot Air Oven

Hot Air Oven Universal Type (Elements on Three Sides)

Temperature range from few degree above ambient to 250 oC is controlled by a precision thermostat with sensitivity of plus minus +- 2% oC. Heating elements are placed in ribs at the bottom and sides. In the chamber 2 removable shelves are provided. Adjustable air ventilators are placed near the top of the side's. Built in L shape thermometer. Double walled inside anodized aluminum/stainless steel. Outside mild steel painted in epoxy powder coating with perforated adjustable shelves. Two indicators, thermostate and on/off switch. To work on 220/230 volts A.C. supplied with or without air circulating fan.

Inner Chamber Size
Ltrs.
300x300x300mm (12"x12"x12")
28
355x355x355mm (14"x14"x14")
45
455x455x455mm (18"x18"x18")
95
455x455x605mm (18"x18"x24")
125
605x605x605mm (24"x24"x24")
224
605x455x910mm (24"x18"x36")
252
605x605x910mm (24"x24"x36")
336
  • Air Circulating Fan.
  • Digital Temperature Indicator cum controller.
  • Imported Timer.
  • PID Digital Temperature Controller.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price
  • Type 304 stainless-steel construction
  • Built-in cadaver submersion storage system with an integral cadaver platform that can be raised when needed for study and lowered for storage
  • Raising and lowering is accomplished through a two-position manual lifting mechanism.
  • Yes! I am Interested
    REQUEST CALLBACK
    Ask Latest Price

    Description & Specification:

    Heat Conduction In Solid Study State Parallel Or Counter flow Possible Double tube water to water heat exchanger Comparative heat exchanger performance of double tube. Shell and tube. Cross flow and plate type Flow rates and water temperature independently variable Constant temperature hot and cold water supplied Measures flow rates and water temperatures Full instrumentation provided Non pulsation and constant water head available Incorporates electrically heated water tank Compact and free standing Main controls and instruments at convenient working height.

     

    Product Experiments:

    Exp-1Determination of the thermal conductivity of various specimens.

    Exp-2 Temperature curves as a function of length.

    Exp-3 Heat transfer through different specimens connected in series.

     

    Salient Features:-

    • Compact design.
    • Measurement of up to 4 temperatures.
    • Usage of several measurement specimens in series.
    • Variable heater power
    • The fundamental laws of steady-state thermal conduction in solid bodies can be investigated with this experimental unit. The specimens are arranged between an electrical heater and a water-cooled plate. A Dewar vessel prevents the exchange of heat with the surrounding environment. The specimens are equipped with several temperature measuring points. The heat transfer rate is determined via the current and voltage of the heater.

     

    Brand ATICO

    Yes! I am Interested
    X
     

    Download Brochure
    Advanced Technocracy Inc.

    Kunal Chopra (CEO)
    Atico House 5309, Grain Market Near B.D School
    Ambala - 133001
    Haryana, Atico House 5309, Grain Market,
    Send Email
    © Advanced Technocracy Inc.. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited