Laboratory Instruments

Student Spirometer:

• 6 liter capacity for vital capacity
• Used as a gas meter with chain/ plastic tread compensated counter balance to the float balance to cut its movement
• Pulley calibrated to denote volume inlet & outlet tubes
• Side cock for gases
• Cock for draining off water strong construction
• Complete with corrugated tube mouth piece and recording lever.

Anaerobic culture jar (mcintosh and fildes pattern), for the safe growth of anaerobes through cold catalyst. It consists of a glass jar approx. 23cm. High x 13cm. Dia. , metal covr fitted with two needle valves for evacuating and filling and a sachet for holding the catalyst but without catalyst. The jar can be used both with cylinder as well as with gas packs. Complete with petri dish holder with pressure gauge.

Universal Combined Kjeldhal Digestion and Distillation Unit Electrically heated, comprising of one single mild steel tubular stand provided with two heating shelves one above the other. A specially designed glass fume duct with B 24 Cone openings(suitable for flasks having 24/29 socket) having such provision so that no leakage of fumes takes place. One heater box having individual energy regulators for 500watts heaters are supplied in digestion part. One heater box of above design is supplied in distillation part.Distillation part is also provided with brass condenser rack with water circulation systems and clamps. The whole unit is operated on 220volts AC mains. Complete with glass parts for 3 tests or 6 tests.

Soxhlet Extraction Unit with Energy Regulator:

These are ideal heaters for extractors of soxhlet & other types. This apparatus is suitable for heating soxhlet flasks of 50-500 ml and consists of two vertical & one horizontal rod with adapters, mild steel sheet housing & screws to hold the flasks. These work on 220/230 A.C.

 

Models:

• Unit of 3 test Mantle Type (Without Glass parts & Clamp)
• Unit of 6 test Mantle Type (Without Glass parts & Clamp).

We provide high performing ishihara test book that is highly recognized in the global market. Our ishihara color blindness test charts are perfect for testing the color deficiency. Every single color test plate of our ishihara color blindness test charts is precisely printed to measure accurately. We offer ishihara color blindness test charts at very reasonable prices at a very brisk pace. We are well reckoned as one of the prime ishihara color vision test plate manufacturers in india.  

The Harpenden Skinfold Caliper is a precision instrument designed for use in the performance of Skinfold thickness measurements (from which estimates of body fat are derived). The use of this instrument has been well established and documented over the past 40 years.

The Harpenden Skinfold Caliper has been used all over the world on projects of international importance and is the most prestigious Caliper available. 

It is the only Caliper CE marked under the Medical Devices Directive 93 / 42 / EEC for a Class 1 Device with Measuring Function and is calibrated using masters traceable to National Standards.

 

• Dial Graduation: 0,20 mm
• Measuring Range: 0 mm to 80 mm
• Measuring Pressure: 10 gms/mm2 (constant over range)
• Accuracy: 99.00%
• Repeatability: 0,20 mm.

Senior Rotary Microtome is a higly versatile sectioning device suitable for medical institutions, reearch & Pathological Laboratories. This microtome has special application for cutting these sections of histopathological specimens. It is ideal for those who want  to avail advantages of a Rotary Microtome at a moderate cost.The entire mechanism stands on a heavy cast iron base ensuring stability and rigidity, its compound slide ways of critical tolerance guide the specimen block. The metal hinged cover housing protects the internal machanism against dust and paraffin waste, it can be conveniently opened for resetting, cleaning and lubricating. The microtome is driven by a handle which can also be locked. Cutting sections are obtained in different thickness by machanically operated crank through a lnurled in front of the instrument. The knurled knob is graduated in microns for feed setting and ready reference detent click action ensures positive adjusments in one micron increment. The knife holder unit is equipped with a rotating knife clamp to adjust desired angles for best sectioning. It as forward and backward movement to ensure contact of specimen with the knife and lateral movement to get maximum use of knife edge.Smooth & accurate specimen movement is achieved with the time proven operating principles of the feed mechanism. Travel is entirely independent to the vertical movement of the specimen block.When the feed limit reaches to an end point, it disengages itself. To bring the feed screw back, the vice is pressed slightly and the main gear wheel is turned clockwise till the screw reaches its starting position. All parts are fabricated from selected alloys and the Microtome knife is manufactured from fine grain steel tested to maintain optimum sharpness strength.

• Feed Adjustment           1-25 Microns
• Minimum Thickness       One microns
• Total Feed execursion    28mm
• Objecct Holder(3Nos.)     1 Set
• Knife 120mm in a box    1 Nos.
• Honing Stone                1 Nos.
• Lubricating Oil               1 Bottle
• Dust Cover                    1 Nos.
• Operating manual          1 Nos.

Laboratory hot plates are available in round and rectangular shapes.Body is fabricated out of thick mild steel duly finished with powder coating.heater made of kanthal wire to operate on 220V AC 50Hz single phase.Heat is controlled by three point ritary switch with an indicator lamp fo mains etc.


Optional(Extra Cost)

• 1. Energy Regulator.

Body made out of thick mild steel finished with powder coating.Heavy duty motors for suitable capacities are provided for long time continuous operation.Fixed speed and variable speed models are offered.Platform is provided with lotus type clamps or rubber discs to hold flasks.
RPM Range-upto 200RPM.electronic control 0-60min.timer.
Workable on 220V AC 50Hz.Single Phase.

Platform size in cm. Holding Capacity   Motor Type
45x45cm. 36 Flasks of 50ml. PMDC
45x45cm. 25 flasks of 100l.   PMDC
45x45cm. 15 flasks of 250ml. PMDC
55x55cm. 25 flasks of 250ml. PMDC
65x65cm  36 flasks of 250ml. PMDC
105x105cm. 64 flasks of 250ml. PMDC
105x105cm. 81 flasks of 250ml. PMDC

Optional(Extra Cost)
1. Digital RPM Indicator
2. Digital Timer(0-99 minutes).

Suitable for VDRL and other agglutinating tests, blood grouping tests, for mixing of solutions in small flasks beakers or bottles.Platform size 300x300mm.Supplied with spring wire holder(2 Nos.) for holding flasks.Fixed or Variable RPM range 180 RPM, with 60 minute timer.Workable on 220V AC 50Hz.Single Phase.
Optional(Extra Cost)
1. Digital RPM Indicator
2. Digital Timer(0-99min.).

This is a tripled walled orbital shaking incubator cum B.O.D Incubator specification designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many laboratory procedures such as tissue culture. Fermetation studies, enzyme reaction, growth studies etc. The outer chamber is made up of MS Sheet duly painted or powder coated & inner chamber is made of thick s. S. Sheet. The gap between walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window makes it possible to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5⁰c to 60⁰c. The temperature is controlled by dual display microprocessor pid digital temperature indicator cum controller with a accuracy of ±0. 5⁰c. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30rpm to 250rpm. The tray of the shaker is also made of s. S. Sheet with lotus type clamps to hold flasks. The unit is fitted with digital rpm meter 999min digital time.
Capacity temp range rpm range
16 flasks of 50ml. 5⁰ to 60⁰  upto 250 rpm
25 flasks of 250ml. 5⁰ to 60⁰ upto 250 rpm
36 flasks of 100ml.    5⁰ to 60⁰ upto 250 rpm
optional(extra cost)
1. Timer 0-24 hours
2.   automatic voltage stablizer 3kva(most rec. ).

Chrome Plated steel case, non-rusting, dust and damp-proof, 7-Jewelled lever movement bold figures, white dial and black steel hands. With start, stop and resent arrangement.
1/5th seconds 30 minutes
1/10th seconds 60 minutes.

Timer, showing normal time, hours, minutes, seconds. Days, dates, months are displayed, 1/100th second. with alarm.

Hot Air Oven

Hot Air Oven Universal Memmert Type (Elements on Three Sides)

Temperature range from few degree above ambient to 250 ^oC is controlled by a precision thermostat with sensitivity of plus minus +- 2% ^oC. Heating elements are placed in ribs at the bottom and sides. In the chamber 2 removable shelves are provided. Adjustable air ventilators are placed near the top of the side's. Built in L shape thermometer. Double walled inside anodized aluminum/stainless steel. Outside mild steel painted in epoxy powder coating with perforated adjustable shelves. Two indicators, thermostate and on/off switch. To work on 220/230 volts A.C. supplied with or without air circulating fan.

• Air Circulating Fan.
• Digital Temperature Indicator cum controller.
• Imported Timer.
• PID Digital Temperature Controller.

Type 304 stainless-steel construction

Built-in cadaver submersion storage system with an integral cadaver platform that can be raised when needed for study and lowered for storage

Raising and lowering is accomplished through a two-position manual lifting mechanism.

Medico Centrifuge Machine is a low priced unit that meets small capacity centrifuging requirements of technicians, doctors, pathological labs & hospitals for routine centrifuging tests. This unit also has resiliently mounted motor, which is fitted to give vibration free performance. Some other features include: 

* 5 step speed controller 
* Supplied with metal carriers 
* Autoclaveable tubes with swing rotor head of 15ml 

Specifications: 
* Maximum Speed: 3500 RPM, Max RCF (xg) 1600 
* Width: 330 
* Depth: 330 
* Height: 295 
* To work on 220/240 volts 50 Hz A.C. Supply.

We offer our clients a wide range of Vacuum Pump:"Oil Filled Double Stage" which are manufactured by implementing original technology. These Vacuum Pumps are widely praised for its various special features and superb performance. Light weighted these Vacuum Pumps are very easy to use and carry.

Features:

· Higher Vacuum: Double stage they can satisfy different demands of vacuum

· Smaller and Lighter Design: Special Preventing oil -returning design. It guarantees there is no pollution in the system being air tighter.

· Powerful starting ability.

· It works on 220 Volts × 10%, 50 Hz A.C.

Capacity:-50 Ltr.25 Micron 1/4 1/4" 180ml.

Used for storing cadaverous under low temperature cool conditions in order to prevent decomposition. These units are double walled with outer made of M.S. sheet duly painted or stainless steel(As per client requirement) and inner walls of S.S. Tray is made of G.I. or Stainless Steel  sheet to carry dead bodies. Tray is made of G.I. sheet to carry dead bodies. Trays travel on rollers fitted with ball bearings for easy movement. Hermetically sealed compressor serves Refrigeration  unit, to maintain temperature range of -2⁰C to 5⁰C or -15⁰C to -20⁰C(as ordered). Unit is fitted with digital temperature indicator cum controller. To work on 220/230V AC. Supply.
Capacity:         Voltage stabilizer   
Single Body:    3KVA
Two Bodies:     4KVA
Three Bodies:  5KVA
Four Bodies:    8KVA
Six Bodies:      8KVA

Membranes Filter Holder Assembly with Support for membrance, Funnel, Flask and clamp, standard joint fitting.
 
 Membranes   Funnel       Flask     

 Dia mm        Cap. ml       Cap. ml

   25               25            250             

   25               50            500                    

   47             300           1000  

   47             300           2000

   47             300           5000.       

 

Chemical Balance:Double pans weighing capacity 200gms accuracy 0.2mg; Sunmica Base.

Designed for accurate and quick examination of the
(a) Refractive index (b) Mean dispersion of liquids, solids and powder.
ND Range:ND 1.300 to ND 1.700 in step of 0.001 
Accuracy:0.0002.
Sugar(Percentage):0 to 95% in steps of 1 division.
Accuracy:0.5%
Temperature:0-100⁰C
The body of the instrument is fixed having a leaning of 60⁰, correct refractive index and sugar percentage can be read directly in the field.It consist of a abbe double prism compensaor, telescope mirror limb, graduated sector, reading magnifier and a radial arm which carries a vernier.Abbe's double prisms leaves a narrow space(about 0.1mm.) between the adjoining faces of prism and compensator consists of the amici prisms which serves for rendering the line of achromatic separation. A thermometer is fitted on the double prism.

Consists of laurent half shade, polariser, analyzer, brass scale graduated from 0 to 360⁰ or 0-180⁰ with vernier reading 6" and accommodates a 200mm. glass tube.It is packed in a card board box.

Slide staining Rack all stainless steel.

Size: 
1. For 10 Slides.
2. For 25 Slides.

Gas Tap
Made of brass. Powder coated. Designed to operate at pressure up to 2 psi. Available with adopter made of Brass. 

• One Way
• Two Way
• Four Way.

Cadaverous Injector

For injecting formaldehyde solution in cadaverous at much higher speed than normal gravity process. Unit is fully covered & mounted on a portable trolley having four castor wheels for easy movement. Unit consists of one air compressor fitted with 1/2 hp motor which is connected with a stainless steel tank of 10 liters capacity meant for storing and injecting the solution. Tank is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection. 

Supplied complete with electric cord, plug and suitable to work on 220 volts, 1ph 50 hz, ac supply.

1. To Determine of Chemical Oxygen Demand.
2. Solid State Block Heated unit with Provision for samples to be digested at a time.
3. 38mm Dia reaction vessels with 20ml sample size o heat at temp. of 150 c ± 1 c.
4. Temperature is controlled by Digital Temp. Indicator cum controller.
5. It has provision for 15 samples.
6. Supplied with 15 nos. glass reaction vessels.
7. Fitted with a ON/Off switch.
8. To work on 220/230 volts AC.

1. These are double walled unit.
2. Outer made of M.S. Sheet duly enamel or Powder Coated paint.
3. Inner made of heavy gauge stainless steel sheet (304 grade)
4. Temperature is controlled by Microprocessor Based PID Digital Temperature Indicator cum Controller with an accuracy  ± 1'C.
5. Provided with vacuum gauge.
6. Precise Vacuum range from 5 c above room temperature to 150 with ± 2c accuracy.
7. Precise vacuum control to 28 (70.2cm) Hg displayed on analog gauge.

Size:-
Round 250mm(Dia)x250mm(Depth)
Round 300mm(Dia)x300mm(Depth)
Round 300mm(Dia)x500mm(Depth)
Rectangular250(W)x250(D)x250(H)
Rectangular300(W)x300(D)x300(H)
Rectangular455(W)x455(D)x455(H). 

Physilab Plant Growth Chamber
1. It has outer wall made of M.S sheet duly painted and inner wall made up of haevy gauge stainless steel (304 grade)
2. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions.
3.Unit is supplied with three adjustable perforated shelves.
4. Finned tube evaporator.
5. Temperature range from 5º C to 50º C  ± 1º is controlled by setting Microprocessor Based Digital Temperature Indicator Cum Controller so as to set two different temperature for Day and Night .
6. Exterior illumination with fluorescent tubes accounts for artificial day light.
7. Cyclic illumination conditions are regulated by automatic Microprocessor based programmable Timer.
8. When all the tubes are on Temperature from 15º C to 50º C ± 1º C can be obtained.
9. CFC Free Eco Friendly Compressor.
10. To work on 220/230 volts AC.

1.These are sturdy double walled units outer chamber made of MS sheet duly enamel painted.
2. Inner made up of mild steel or SS sheet (As Ordered).
3.  Inner chamber is provided with ribs for adjustable perforating shelves to convenient height.
4. Temperature is controlled by Microprocessor Based PID Digital Temperature cum Indicator from ambient 300 C or 390 with accuracy ± 5 c.
5. Air ventilator are also provided on the side or back of the unit.
6. To work on 220/230 volts AC supply.
7. All Units are fitted with air circulating fan as a standard features.
Size:-
1. 300x300x300mm       28 Ltrs.
2. 355x355x355mm       45 Ltrs.
3. 455x455x455mm       95 Ltrs.
4. 605x605x605mm      125 Ltrs.

To Introduce the principals of absorption chromatography using the thin layer technique. This mechanism is having movable applicator with inbuilt thickness arrangement between 0 to 2mm (Minium Div.0.25mm) If further consists of the following components.
1. Spreader (Applicator) made of electroplated brass.
2. Perspex base of 114x23 cm. to support glass plates.
3. Plate reack aluminum, anodised for ten20x20 cm,or 20x10 cm plates.
4. Developing Tank with Lid.
5. Spotting template made of perspex.
6. T.L.C. Plates et of five 20x20cm and two 20x5cm or set of ten 20x10cm, and two 20x5cm
7. Glass Sprayer with rubber bellow, cap.100ml
8. Micro-Pipette or Glass Pipette.
9. Scriber for marking lines made of stainless steel.
10. Instruction Manual.

Specially designed for use in Anatomy & Meat Cutting requirement for preparing big size specimens.The large working table and extension table opearte on ball bearing rollers.
Table is made of thick stainless steel sheet with heavy axles for rigidity and firm movement.

Features:-

1. Fitted with large moving table made from stainless steel 
2. Extension table operated on four ball-bearing rollers 
3. Special heavy axles for easy and firm movement 
4. Power consumption - 220 v 
5. Fitted with premium blade, starter, cord and plug

1. Size of cutting table  :  123x42cm.
2. Extension table     :     61x42cm.
3. Total table travel   :     120x42cm.
4. Height                  :     213cm.
5. Motor Heavy Duty  : 2 H.P. SinglePhase,starter
Complete unit supplied with one blade,starter,cord and plug.
To work on 220/230 volts AC supply.

Optional:- Spare cutting Blade   

We offer customers automatic tissue processors under.These processors are quality instruments used for automatically processing tissue specimens for microscopic observation. For preparing tissue for preservation in its natural state, it is processed through a calculated cycle of fixation to stop all enzyme activities.

Automatic Tissue Processor Features:

• Dehydration to remove all water & infiltration of paraffin
• Permits the tissue to be cut into sections for slide staining
• Working Tissues are inserted in stainless capsules/ uni-cassettes
• Identified & placed into wire mesh baskets that are mounted on hood for processing
• Movable hood raises, transports & lowers the baskets through series often via glass beakers containing processing agents & two stainless steel pots containing hot paraffin
• Tissue is sequentially submerged & oscillated in a fixative dehydrated cleansing agent and finally immersed in paraffin

Automatic Tissue Processor  Advantages:

• Programmable 12 stage timing sequence, having 24 hours calibrated disc
• Delay action of 24 hours
• Precision gear mechanism for trouble frees working
• Safety device for tissue protection
• Thermostatically controlled wax bath
• Each Station with capacity of 1 Liter/2 Liter
• Automatic agitations allow the effective processing of tissues
• Assure utmost convenience in operation

Physilab Automatic Tissue Processor Complete As Above Is Supplied With:

• 24 Nos. Tissue Capsule
• 1 Nos. Basket Rotator for Tissue Capsule
• 10 Nos. Glass Beakers
• 2 Nos. Wax Bath
• 6 Nos. Calibrated Disc (Histokinette Disc).

• The variants (models) of Laminar Air Flow Chamber are available in Stainless Steel, Electro-galvanized Steel or wood covering all applications. 
• The environmental air is drawn by centri-balanced, centrifugal succession blower through pre-filters and is thrown to work plate form through high efficiency H.E.P.A. filters, retaining particulates and biological contaminants larger than 0.3 microns, Table-top is covered with stainless steel  sheet.
 • All the compartments of the chamber are chemically sealed to prevent leakage/loss of air-pressure, Front door is collapsible type & side panels are fixed, made of crystal clear thick plexi-glass or transparent polycarbonate.
 • All variants are available with UV Tube, Fluorescent Tube light, Gas cock & Static Pressure Manometer or Differential Pressure Magnehelic Manometer. Features:- Efficiency: 99.97% (or above) down to 0.3 micron Blower Unit: Centri-balanced, centrifugal motorized blower with ISI marked motor. 1/3 H.P. 1440RPM Discharge: Air volume 90cfm±10% Noise Level: below 65 dB Illumination by Fluorescent Tube: Light Intensity-The intensity of the light at the work Surface is in between 800 to 1000lux. Germicidal: By Ultra-Violet Tube (Approx 50 micro watts per sq.cm on the entire work surface.) Electrical: All electrical fittings are as per ISI standards. All internal wirings are protected with heat resistant material. Manometer: Available are two types: 

1. Dial type Magahelic Differential Pressure Manometer.
2. Block Type acrylic / Plexi-glass inclined Static Pressure Manometer. 
Utility Lines: Gas (standards), Vacuum and Air (On request) 
Sizes are available Horizontal / Vertical:
 2’x2’x2’     3’x2’x2’      4’x2’x2’
 6’x2’x2’     8’x2’x2’.

Bod Incubator  (Bio-Chemical Oxygen Demand)

Designed for low Temperature incubation and routine determination of Bio-Chemical Oxygen demand (BOD). This unit is composed for doubled walled chamber with a thick layer of fine glass wool to prevent loss of heat and cool. For work in lower temperature a cooling unit is provided at the lower portion of the working chamber and heating arrangement has been made in the inner chamber for work of higher temperature. The temperature varies from 5º C to 60º C adjustable at any desired point by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5º C. Air Circulating fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is made up of richly anodized aluminum or highly polished stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in powder coating. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Refrigeration unit is formed by ISO/ISI marked compressor. Control panel is provided with toggle switch, temperature controller, various indicators etc. Complete with automatic internal light, L- shaped thermometer, connecting cord and plug to work on 220V AC 50 Hz single phase.
Chamber Size in mm   Cap. (Cu. Ft)   Cap.(Aprox.)
455x410x610                 4                         112L         
505x415x830                 6                         171L   
565x565x865                10                        280L   
650x580x900                12                        336L 
700x650x900                15                        420L

Optional Extra Cost :-

a. Timer 0 – 24 hours.                         
b.  Internal illumination with 3 florescent tubes.   

Physilab (spencer type) automatic knife sharpener is poratble precise and efficient automatic sharpening equipment with 60 mintue electric timer to control sharpening period. Equipped with universal knife holder to accept all microtome knives unto 180mm in length. The complete internal mechanism is enclosed in a metal hosing with hinged M.S. duly epoxy powder coating paint and perplex cover to ensure dust free and precise sharpening operation.

It has a compact stirring device utilizing a rotating magnetic field (created by a Permanent Mahnet) which induces variable speed stirring action. Stirring is accomplished by means of small Teflon rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. The unit is fitted with pilot lamp. To work on 220/230 Volts A.C.

ADVANTAGES:-
Powerful shaded pole AC induction motor for stirring. Step less electronics speed control for better performance. Heater element is made of Kanthal wire. Hot plate made of die cast aluminum with stainless steel top.

1. Body made of M.S. and Stainless steel chamber the units are fitted with hermetically seated compressor for high capacity cooling.

2.All units are controlled through a highly sensitive temperature control unit.
3.Double walled storage bin are insulated with PUFF for minimal thermal losses. 
4.Fully Insulated And Sealed Ice Production System: No loss of cooling.
5.No Use Of Pumps : No disturbance, repair, wear.
6.No Heating Grids : Low power consumption, No source of deficiencies. 
7.To work in 220/230 VA.C. Supply.

Senior Rotary Microtome

• Available under highly versatile sectioning device
• Suitable for medical institutions, research & pathological laboratories
• Microtome has special application for cutting these sections of histopathological specimens
• Ideal for those who want to avail advantages of Rotary Microtome at competitive costs, the entire mechanism stands on heavy cast iron base thus ensuring process stability.
• Shows compound slide ways of critical tolerances guide the specimen block
• Metal hinged cover housing that protects internal mechanism against dust & paraffin waste
• It can be conveniently opened for resetting, cleaning & lubricating
• Microtome is driven by handle which can also be locked
• Cutting sections obtained in different thickness by mechanically operating crank
• The knurled knob comes in microns for feed setting & ready reference
• Knife holder unit is equipped with rotating knife clamp to adjust desired angles for best sectioning
• It has forward & backward movement to ensure contact of specimen with knife. Lateral movement that provides maximum use of knife edge as well as smooth & accurate specimen movement achieved with the time proven operating principles regarding feed mechanism
• Travel is entirely independent of the vertical movement of the specimen block
• In areas where feed limit reaches to an end point, it disengages itself
• All parts fabricated from selected alloys
• Microtome knife is manufactured from fine grain steel tested to maintain optimum sharpness strength.

Freezing micotome is an versatile section equipment used for cutting thin to semi-thin sections of fresh,frozen material and semi-thin sections from industrial products such as some textiles, paper, leather, soft plastics, rubber, powders, pastes and food products by carbon dioxide freezing attachment. Suitable table clamp is provided for fixing the equipment to the side of any standard table. Suitable to Cut sections up to 40 microns in step of 5 micron each. 

Technical Features:

1. Freezing stage: 35mm dia., Feed range 5-40 microns.
2. Total feed excursion 25mm.
3. Supplied with razor 120mm with back & handle, honing plate, Co2 freezing attachment & stage, oil can, spanner for attachment to Co2 cylinder.

Freezing micotome is an versatile section equipment used for cutting thin to semi-thin sections of fresh,frozen material and semi-thin sections from industrial products such as some textiles, paper, leather, soft plastics, rubber, powders, pastes and food products by carbon dioxide freezing attachment. Suitable table clamp is provided for fixing the equipment to the side of any standard table. Suitable to cut sections up to 40 microns in step of 5 micron each. 

Technical features: 
·  freezing stage: 35mm dia., feed range 5-40 microns. 
·  total feed excursion 25mm.

Recently in the histopathological examination, as for specimens of particularly large area or hard materials as well as for special purposes, very thin specimens such as of 1-3 microns or other sections of various kinds have been increasingly demanded. Large Sledge Microtome has been fabricated by improving hitherto used Microtomes providing their inherent characteristics to meet the above requirements. as such this model is highly recommended for all biological and reasearch laboratories for sectioning of soft tissues and also hard materials such as stem, root or other Botanical objects etc. It is very suitable also for Ear, Nose and Throat Departments where sections of fairly large specimens are required. If incorporated a Freezing attachment, this microtome can be as a Freezing Microtome.

Introduction
This Microtome consists of Main body (Slide-Way), Object Clamping Stage, Feeding Device and Knife Clamping Block. The body of the Microtome has 3 tracks of 400mm horizontal slide for knife clamping block and 3 tracks of inclined slide for object clamping stage and feeding device. The shape of the knife block and its contact with 9 tracks eliminate riding up or tilting of the Microtome knife during the cutting.

The knife Clamping Block has a ball for clamping the knife holder and a handle. The knife Holder is fitted with two screws serving to eliminate vibration of the knife. The clearence angle of the knife can be adjusted by means of a screw drive.

The object Clamping Stage has a sliding stage and object clamping holder, THe object clamping holder is equipped with two rack and pinion swivelling device which can be oriented for adjustment of cutting object. It can be raised or lowered by rack and pinion for the approximate height adjustment of the object. The specimen blocks upto 30x30mm can be held in it.

The Feed Device can be adjusted for section thickness between 1 to 10microns by increment of 0.5micron by hand, with settling drum calibration scale. The specimen rises accurately by a micrometer screw fitted with a ratchet gear and lever transmission. The feeding screw is 40mm. in effective length and of open-and-close half-nut type, it returns to the initial position when the handle is opened.
Thin and accurate paraffin sections can be readily obtained. This may also be applied for preparing celloidin specimens.

Deonizer :(Ion Exchanger)

The plant consists of One cation Exchanger column containing cation Exchanger Resin. One anion exchanger column containing anion exchanger Resin. Plant is mounted on M.S. stand with assembly of valves and tubing. One conductivity meter with cell to monitor the ionized solids of purified water and thus control the functions of demineralisation. The meter is direct reading having reading heavy range 0.40 microns/cm.

a) Cap. or flow rate 30 to 50 It/hr.

b) Cap. or flow rate 75 to 100 It/hr.

Autoclave - Aluminum (Cooker Type)

Sizes Available : 
300mm x 300 mm (12" x 12")

Specifications : 
Made of Heavy Duty Aluminum
Double Safety Valve. 
Fitted with 2.5" Special Gauge.
Steam Release Valve 
Water Outlet Assembly 
Working Pressure 15 lb
Electric Load 2 KW

Optional: Electrical/ Non Electrical.

Autoclave - (Aluminum)

Sizes Available : 
300mm x 300 mm (12" x 12")
300mm x 375 mm (12" x 15")

Specifications : 
Made of Heavy Duty Aluminum
Double Safety Valve. 
Fitted with 2.5" Special Gauge.
Steam Release Valve 
Water Outlet Assembly 
Working Pressure 15 lb
Electric Load 2 KW

Optional: Electrical/ Non Electrical.

Autoclave - Stainless Steel Cooker Type (Seamless)
Sizes Available

• 250mm x 250 mm (10" x 10")- Special ly for Dental Purpose
  
• 300mm x 300 mm (12" x 12")
  
• 300mm x 375 mm (12" x 15")

Specifications

• Made of Heavy Duty Stainless Steel
  
• Double Safety Valve.
  
• Fi t ted wi th 2.5" Special Gauge.
  
• Steam Release Valve
  
• Water Out let Assembly
  
• Working Pressure 15 lb
  
• Electric Load 2 KW

Optional :

Electrical / Non Electrical.

UV chromatography inspection cabinet for viewing & detecting prepared substance on t.l.c. plates and a number of other laboratory & investigation work. this cabinet is fitted with two u.v. tubes of different wave lengths & a floresence tube for visible light. an eye protective glass window is also provided on the top front for viewing the samples.

We bring forth a wide variety of Heating Mantles which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantle is available with a sturdy aluminum body. Its epoxy powder finish makes it a distinguished product. The Heating mantle which we offer is best suited for round bottom flask. Proper electric wiring makes certain that no short circuit takes place. The high temperature range of 400 degrees Celsius makes our Heating Mantles ideal for industrial use. We are a leading company engaged in Flexible Fabric Heating Mantles Manufacturing in Mumbai. 

Features :-

• Aluminum body with epoxy powder coat finish
• Fiber glass net with long lasting nichrome heating element
• High grade glass wool insulation
• Suitable for round bottom flask
• Energy regulator with corresponding lamp indicator to control the temperature
• Temperature Range: Up to 400 degrees Celsius.

Our company offers table top model of Barn stead Type Water Still to the clients. The complete unit of barn stead type water still is made from stainless steel along with complete argon welding. The high quality kettle type immersion heater is provided with our highly efficient Manesty Type Water Still. We also inculcate water level and drain facility in this barn stead type water still for efficient working. Features :-

• Heavy gauge top mounted S.S. flange.
• Accurate and pyrogen free distill water.
• High quality Kettle type immersion Heaters.
• Opening type condenser for periodic cleaning by opening flange.
• Water level and Drain facility.

Incubator Bacteriological (Memmert Type):-Temperature range few degree above ambient to 70’C. Thermostatic control with a sensitivity of plus minus ±2%ºC. heating elements are paced in ribs at the bottom and sides. Doubled walled inside anodized aluminum or stainless Steel, outside Mild steel painted in epoxy powder coating. Built in ‘L’ shape thermometer with perforated adjustable shelves. Double walled door with double glass window. To work on 220/230 Volts A.C. Supplied with or without Air Circulating Fan.
Optional:
• Air Circulating Fan.
• Digital Temperature Indicator cum controller.
• Imported Timer.
• PID Digital Temperature Controller.

Inner Chamber Size                                 Ltrs.
1. 300x300x300m (12”x12”x12”)                28
2. 355x355x355mm (14”x14”x14”)             45
3. 455x455x455mm (18”x18”x18”)             95
4. 455x455x605mm (18”x18”x24”)             125
5. 605x605x605mm (24”x24”x24”)             224
6. 605x455x910mm (24”x18”x36”)             252
7. 605x605x910mm (24”x24”x36”)             336.

Vertical Autoclave
Based on the principal of saturated steam sterilization. Electrically heated. Used for sterilization of rubber, utensils, Linen, plastic, dressing material, surgical items, glasswares, lab wares etc. It is used in scientific research institutions ,universities, hospitals, mushroom centers, tissue culture labs etc. Sturdy construction, Double walled, Inner chamber Le. boiler made of 16 SWG stainless steel of 304 quality, outer shell is made of thick mild steel duly painted. The boiler and outer shell is provided with air insulation. Lid is made of thick mild steel duly Stainless steel lined and is tightened by Radial locking system. Lid is mounted on a central screw and is provided with best quality joint less neoprene gasket to avoid any risk and trouble free operation. These autoclaves are fitted with paddle lifting device to open/close the lid. Fitted with glass indicator to indicate the water level inside the boiler. These autoclaves are fitted with pressure gouge, steam release cock, safety valves, spring loaded safety valves etc. These autoclaves can be set at any pressure in between 5 to 22 P.S.L Provided with drain valve. These autoclaves are hydraulically tested up to 40 P.S.L Provided with ISI mark heating elements which are easily replaceable and heats the water to desired temperature and pressure. Pressure is indicated by pressure gouge. Supplied complete with stainless steel perforated basket, cord plug to work on 220 V +/- 9% 50 Hz, single phase.

Physic lab Vertical Autoclave Sizes:-

<!-- @page { size: 8.5in 11in; margin: 0.79in } TD P { margin-bottom: 0in } P { margin-bottom: 0.08in } -->

 

 

Tissue Culture Rack

1.Made out of thick square MS Pipe frame.

2.Distance between shelves to shelves is 16.

3.Size of each shelf is 48 x 18.

4.Platform surface will be of 3mm thick.

5.Four 40-watt fluorescent light (With Electronic Ballast).

6.Minimum heating effect/heat dissipation.

7.No Flickering effect.

Energy saver with individual switching arrangement in each shelf.

• Total 16 Electronic Ballast/Simulator.
• 4x25 Watt incandescent lamps in each shelf with switching arrangement.
• Frame with MS square pipe 1 X 1 With Anticorrosive, Humidity Resistant Powder Coating finish culture rack.
• Wheel/Castor-4No.s for each trolley.
• Provision for connecting the Trolley to photoperiodic Timer/Controller output.
• Input 200-240 V AC, 50Hz, Single phase, ambient 5^oC to 50^oC, RH upto 95%. 
  

No. of Shelves:

A. Unit of four shelves (lighting facility in 3 Shelves).

B.Unit of five shelves (lighting facility in 4 Shelves).

C.Unit of six shelves (lighting facility in 5 Shelves).

 Glassware Dryer

1. A powerful and heavy duty electrically driven blower fitted at the base.
2. Air is forced through 36 Mild steel pipes.
3. Heating coils controlled through a energy regulator are provided above the blower to heat the blown air through the tubes.
4. To work on 220 volts AC Supply.

Centrifuge machine offered by us offer multipurpose functionality in the laboratory environment for carrying out routine / special work in medical & industrial laboratories. This table top centrifuge is very compact and feature robust construction. Its special features include transparent see through acrylic lid for angle rotor head, easy lid lock, step less speed controller, safety fuse & attractive front panel. We supply it with detachable metal carriers with up to 4000-6000 RPM.

Other Features:

• Step less speed controller
• Digital Speed Meter (RPM)
• 60 minute digital preset Timer .
  

Models:

• With 8x 15ml Angle Head
• With 12x15ml Angle Head
• With 16x15ml angle Head
• With 24x 15ml Angle Head

Medico Centrifuge Machine:

It is a low priced unit that meets small capacity centrifuging requirements of technicians, doctors, pathological labs & hospitals for routine centrifuging tests. This unit also has resiliently mounted motor, which is fitted to give vibration free performance. Some other features include:

• 5 step speed controller
• Supplied with metal carriers
• Autoclaveable tubes with swing rotor head of 15ml

Specifications:

• Maximum Speed: 3500 RPM, Max RCF (xg) 1600
• Width: 330
• Depth: 330
• Height: 295
• To work on 220/240 volts 50 Hz A.C. Supply

Models:

• With 4x15 ml Swing Out Head
• With 6x15 ml Swing Out Head
• With 8x15 ml Swing Out Head

Clinical Centrifuge Machine (Doctor Model):

It is low priced unit that satisfies the small capacity centrifuging requirement of doctors, pathological labs, technicians & hospitals for routine centrifuging tests. This unit has resiliently mounted motor that comes fitted to give vibration free performance.

Features:

• 5 step speed controller
• Supplied with metal carriers
• Autoclave able tubes and angle rotor head of 15ml
• Comes with see through acrylic cover lid

Specifications:

• Maximum Speed: 4000 RPM
• Works on 220/240 volts 50Hz AC Supply

Models:

• With 4x15 ml Angle Head
• With 6x15 ml Angle Head
• With 8x15 ml Angle Head.

TRAY DRYING OVEN

TRAY DRYING OVEN 
FEATURES:-

1. Double walled unit mounted on a sturdy angle iron frame.

2.  Inner and outer made up of heavy M.S. Sheet.

3. Outer body is hammertone painted.

4.  Supplied with Aluminum trays as per tray capacity of the unit.

5. Inner body is painted with high temperature aluminum paint.

6. Gap between two walls is filled with high-grade glass wool to minimize thermal loss.

7. Brackets to support the heavily laden drying trays at adjustable height are provided on the sides of inner walls.

8. Heating is brought about by strip type air heaters.

9. Temperature range from ambient to 150^oC.

10. Temperature is controlled by Microprocessor Based PID Digital Temp. Indicator-cum-Controller with an accuracy of + 1^oC.

11. Ventilation is provided with adjustable opening at the top to exhaust the fumes or vapours produced during processing.

12. Heavy duty 'V' belt driven motor of suitable capacity provides forced air circulation so as to ensure uniform heating throughout the inner chamber.

13. A separate control panel is fitted to the chamber with individual control for ON / OFF and air circulating fan.

14.To work on 220 Volts or 400/440 Volts A.C. supply only.

Optional Accessories

A. Additional Standard Tray of size 800 x 400 x 30 mm, if required.

B. Auto Time Control Unit: Specially designed Microprocessor Based Pid Digital Temperature Indicator cum-controller with an in-built DIGITAL TIMER to control the temperature from 50^oC to 150^oC (+1^oC). Once the unit is switched heating starts automatically and once the set/desired value is achieved the In-built Automatic Digital Minute Timer starts automatically. Once this set time period is over the heaters are switched "Off" automatically and the unit sounds a BUZZER, thus alerting the user that process is complete. To cost extra, in lieu of Microprocessor based PID Digital Temperature Controller.

Rotary Flask Shaker
1. Heavy Duty shakers are for applications demanding continuous operations.
2. Supplied with Mild steel powder coating Platform with Clamps for holding Erlenmeyer flask.
3. Fitted with PMDC Heavy Duty Continuous rating Motor.
4. Speed is controlled through based DC Drive Unit by a speed control knob.
5.Fitted with Digital RPM Meter.
6. Fitted with manual Timer/Digital Timer on demand.
7. Fitted with Variable Speed Controller knob.
8. Flask Holding capacity 5000 ml & 10000 ml.
9. To work on 220Volts AC Supply. 

Temperature range from few degrees above ambient temperature to 100ºC. These units are double walled with inner chamber made of Stainless Steel and outside of MS duly enamel or powder coating painted. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit, the inner chamber fitted with immersion type heating element is covered with the unit as a standard accessory. Lid of water bath is made of stainless steel. To work on 220/230 Volts A.C.                                                                                                                                                 Chamber Size     Suitable Racks      Cap.(aprox)
300x175x175         1Rack                  12Ltrs
300x250x175         2Racks                14Ltrs
375x300x175         4Racks                18Ltrs
455x300x175         6Racks                25Ltrs
605x300x175         8Racks                32Ltrs

Optional:
1. Digital temperature Indicator cum Controller
2. Microprocessor PID Digital Temp. cum Controller
3. Stirrer arrangement with 1/20 HP motor and speed regulator.   

It is a double walled bath with inner chamber made
of stainless steel and outer wall made of M.S sheet
duly enamel or powder coating painted. The gap
between outer and inner walls is fitted with special
grade glass wool insulation. The temperature is
controlled by a thermostat from room temperature
to 100°C with variation of ± 2%° C. The concentric
rings can be removed to accommodate containers of
various sizes.

Size Inside Chamber
1. 355x405x100mm   12 Holes of 75mm dia.

Made out of heavy gauge stainless steel with
concentric rings. Auto cut heating elements are
fitted to protect the same when bath gets dry. To
work on 220/230 volts A.C.

Size inside Chamber
1. 300x250x100mm 6 Holes of 75mm dia.

Fume Exhaust hoods are designed to contain and exhaust toxic, Obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment. A motor driven blower creates negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn from inside the laboratory which is used effectively for through sweep out of the work chamber. Features:  
1. Inbuilt Centrifugal Blower unit
2. Fluorescent tubes with safety electrical
3. Internally located Electric Plugs
4. Gas Vaccum & Air Connections
5. Counter balanced sliding up & down front sash(door).

For agarose DNA GEL Electrophoresis
1. Submarine Tank with comb slots
2. Power supply 50/100V
3. Acrylic comb-pre height adjusted
4. Connecting cord
 
Gel Size: 100x70mm

Dimension MM:160x80x20mm

Buffer Vol. : 170ml approx.

Comb: 8well

Comb Thic. :1.5mm

Capacity / well:40µl.

These Deep Freezer are generally used in Microbiology, Virology, Pathology, Food Research Laboratory, Biotechnology etc. It has been designed to maintain constant temperature at set temperature. 

Construction: This is double walled cabinet with 100mm puff insulation. outer wall is made of mild steel sheet and inside chamber made of Stainless Steel 304 Qlty. Full view acrylic glass door is also provided. Cabinet is mounted on casters for easy movement from one place to another.

Features:-
1. Double walled units have thick PUF Insulation between inner and outer wall.
2. Outer wall scratch free moulded or of mild steel sheet duly power coated.
3. Temperature range from ambient to(-)20'C or
 (-)40'C is achieved by hermetically sealed compressor.
4. The copper cooling coils are welded throughout on the outer side of the S.S. Chamber with provided efficient cooling.
5. Body is mounted on a sturdy angle iron frame and is mounted on caster wheels.
6. Unit is fitted with Microprocessor Based Digital Temperature Indicator-cum-Controller.
7. CFC free ECO friendly compressor.
8. To work on 220/230Volts A.C. supply

Capacity                                         Ltrs. 
4cu.ft                                    112
6cu.ft                                    171
10cu.ft                                  280

Available in vertical and chest type horizontal models.
     

Lab Refrigerator
Salient Features:-     1.Corrosion Free exterior and interior Audio visual alarm for high and low temperature.        

2. Special design ensuring best hygiene reliable.  

3. Sturdy Construction.                                      

4. Digital Temperature indication.                          

5. Low Maintenance. 

6. Light Weight. 

Construction Detail:- Refrigerator is double walled. Outer body of our Lab Refrigerator are constructed out of thick steel/aluminum sheets, painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of 304 grades. The 100mm gap between the walls is insulated with high grade poly uretherane insulation, which ensures maximum thermal efficiency. Outer 

Panels:- The outer panels of our entire Lab Refrigerator are made of galvanized mild steel having a superior bacteria resistance coating for greater hygiene. Cooling:- An energy efficient cooling unit is installed in our Lab Refrigerator. We use ISI marked high end CFC free Compressors of Kirloskar/Tecumesh/Denfoss make, conforming to latest international standards and guidelines. 

Features:-

1. Mounted on a sturdy angle frame the inner chamber is made up of stainless steel 304 grade with 26 SGW and outer of mild steel(C.R Sheet) 20 & 22 SGW duly enamel painted.                          

2. Double walled units have thick PUF insulation between inner and outer wall.                            

3. The temperature is maintained with in 2ºC to 8ºC.Temperature is controlled by Digital Indicator-cum-Controller.                                                  

4. Unit is provided with Audio Visual Alarm which triggers in the event of fluctuation exceeding permitted tolerance.                                          

5. Besides outer double walled door, a full view inner glass door allows inspection of test samples without disturbing the inner chamber conditions.  

6. Unit is also fitted with Power Supply Failure Alarm as a safety device Three or four drawers are provided for holding laboratory material.              

7. CFC Free ECO Friendly Compressor.                  

8. Body is mounted on caster wheels to move the refrigerator anywhere in lab.                                

9. Capacity 171 Liters. Volume 6.1 Cuft.            

10. The refrigerator work on 220/230Volts AC Supply.

Construction:-The inner and outer chamber is made of high-grade stainless steel sheet the strong and sturdy lid is also made of high grade stainless steel plate. The unit is fitted with very efficient radial locking system made of stainless steel bars ), steel, chrome plated, with paddle lifting device. Supplied complete with stainless steel basket. The unit is fitted with safety valve, pressure release valve, water level indicator, cord and plug. To operate on 220/230 Volts, 50Hz AC supply.

Mode of Heating:-

Electrically heated by special flange type/immersion type heaters bearing ISI mark, to operate on 220/230 Volts, 50Hz AC supply.

Working Pressure:- The pressure inside the chamber is variable from5psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2Kgf/cm2 g(156psi – 17psi)

Working Temperature:- 121ºC

Working Pressure:- 1.26Kgf/cm2(15 psi)

Working Chamber:-

 

STANDARD CONTROLS:-

1. Double safety radial locking arrangement.
2. Brass steam release valve.
3. Spring loaded safety valve of brass.
4. Water level indicating gauge glass with metal guard.
5. Pressure gauge.
6. Electrical control box, fitted with toggle switch, indicating neon lamps and steam release valve.
7. Foot Operated Paddle Lifting Device.
   
   Optional Accessories:
   Automatic pressure control switch, automatic low water cut off device, mechanical timer with alarm system, temperature indicator(Digital / Analog), temperature chart recorders.
   
   Optional Accessories(Advanced):-
   Microprocessor based temperature / pressure controller cum indicator with pressure transmitter, complete automatic operation through advanced PLC system, data control and acquisition systems with remopte location operation facility, user friendly software packages for various reporting and analytical application.

Bacteriological Incubator Provided with digital temperature controller cum indicator in lieu of thermostat & fitted with fan fan to achieve same temperature,in each & every corner of the chamber.

Standard double wall fabrication. Inner chamber is made out of richly anodized aluminum or highly polished stainless steel sheet and outer is made of thick mild steel finished with powder coating with light color combination's. The gap is fitted with high grade glass wool for heat insulation. Double wall door with double toughened glass windows is provided for observation in the chamber.

Temperature range 5° C above ambient to 110° C is controlled by Digital Temperature controller is provided for taking temperature readings. Heating is achieved from three sides. Supplied with plug and chord. Equipment suitable to be working on 220V AC 50Hz single phase.

 

Hot Plate Rectangular
Laboratory hot plates are available in round and rectangular shapes.Body is fabricated out of thick mild steel duly finished with powder coating.heater made of kanthal wire to operate on 220V AC 50Hz single phase.Heat is controlled by three point ritary switch with an indicator lamp fo mains etc.

Size                                           Top
8"Dia                                         Round
12"X10"                                   Rectangular
16"X10"                                   Rectangular
18"X12"                                   Rectangular
24"X18"                                   Rectangular

Optional(Extra Cost)
1.  Energy Regulator
2. Digital Temperature Controller PID  
    Microprocessor Based.

Working Temperature maximum 1000C. Fitted with energy regulator. CI/AL thermocouple with prometer.Heating elements are made up of Kanthal wire.Workable on 220V AC 50Hz Single Phase.
Inner Size(mm) Inner Size(Inch)
225x100x100 9"x4"x4"
250x125x125 10"x5"x5"
300x150x150 12"x6"x6"

Optional:-
(a) Digital Temperature indicator cum controller.
(b) PID Digital Temperature Controller.

Light weight with ceramic fibre wool installation in place of refractory bricks.Working temperature 1150C.Maximum temp. 1200C.Fitted with energy regulator.CI.AL thermocouple with prometer. Heeating elements are made up of kanthal wire.Workable on 220V AC 50Hz Single Place.

Inner Size(mm)                                Inner Size(Inch)
225x100x100                                  9"x4"x4"
250x125x125                                 10"x5"x5"
300x125x125                                 12"x5"x5"
300x150x150                                 12"x6"x6"
300x200x200                                 12"x8"x8"
350x175x125                                 14"x7"x5"
375x175x125                                 19"x7"x5"
350x225x225                                 18"x9"x9"

Optional:-
(a) Digital Temperature indicator cum controller.
(b) PID Digital Temperature Controller.
       

Butyro Refractometer physilab Butyro Refrectometer :-Measurement of fats in oil and other such products giving a reading directly in terms of the oil scale also known as butyro scale, the micrometer eye-piece allows an accuracy on this scale of 0.1 and the oil scale may also be converted into a refractive index scale using conversion tables. This allows measurements on materials with index of refraction in the range of 1.42 to 1.49 with an accuracy of 0.0002 as tables are supplied for converting oil scale reading into index of refraction, relative to mean sodium lines.The prism box is water jacketed for temperature control and a sample axiomatizing device enables the removal of all colours from the border lines thus enabling the instrument to be used with white light.

This is a tripled walled Orbital Shaking Incubator cum B.O.D. Incubator specification designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many laboratory procedures such as tissue culture. Fermetation studies, Enzyme reaction, growth studies etc. The outer chamber is made up of MS Sheet duly painted or powder coated & inner chamber is made of thick S.S. Sheet. The gap between walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window makes it possible to inspect the specimen without disturbing the inner temp. the incubator is illuminated with one door operated or panel operated flurescent tube.The unit has a temp.Range from 5⁰C to 60⁰C. The temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ±0.5⁰C.Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30RPM to 250RPM.The tray of the shaker is also made of S.S. Sheet with Lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter 999min digital time.
Capacity                       Temp Range      RPM Range
16 flasks of 50ml.     5⁰ to 60⁰          Upto 250 RPM
25 flasks of 250ml.   5⁰ to 60⁰         Upto 250 RPM
36 flasks of 100ml.   5⁰ to 60⁰         Upto 250 RPM
Optional(Extra Cost)
1. Timer 0-24 hours
2.  Automatic Voltage stablizer 3KVA(Most Rec.).

Double walled, inner made of Stainless Steel, outer
made of thick best quality Mild Steel, the surface of
which is powder coated.

Insulation between inner and outer wall is done with
glass wool to prevent any heal loss.
Inner chamber is provided with 3 nos. perforated
Stainless Steel shelves with ribs to adjust the shelves
at desirable height.

Provided with double door, inner made of thick
transparent full view glass and outer door is double
walled metallic properly insulated with glass wool
and also provided with best quality handle, gasket
etc.

Whole unit is mounted on castor wheels.
Temperature range is from ambient to 60°C and is
controlled by Dual Display Microprocessor PID
Digital Temperature Indicator cum Controller.

Heating is done with ISI mark strip type healers

placed around the inner chamber.

Air circulation fan is provided to maintain stability

throughout

Humidity will be maintained up to 95% with an
accuracy of ±3% and humidity is generated by a
stainless steel tank and is controlled with the help of
Imported Humidistat and is indicated by Round
Hygrometer.

Provided with On/Off switch. Indicators. Digital
Controllers etc.

Description:
Timer, showing normal time, hours, minutes, seconds. Days, dates, months are displayed, 1/100th second. With alarm.

Cadavar Tank more often used for cadavar storage in teaching facilities.

Type 304 stainless-steel construction

Built-in cadaver submersion storage system with an integral cadaver platform that can be raised when needed for study and lowered for storage

Raising and lowering is accomplished through a two-position manual lifting mechanism.

Preservation tank is most often used for cadavar storage in teaching  facilities.

Type 304 stainless-steel construction

Built-in cadaver submersion storage system with an integral cadaver platform that can be raised when needed for study and lowered for storage

Raising and lowering is accomplished through a two-position manual lifting mechanism.

Harpenden Caliper(Indian) for skinfold measurement.

We offer BOD Incubator that are available in different standard sizes and wide temperature range. bod incubator is mostly used for drying; antibody & other bacteriological tests; crystallization & hydroxy steroid incubation studies, paraffin embedding, slide staining and other microbiological tests at constant temperatures. The used categories include chemicals & bio-chemicals; pollution control & monitoring; research & development and quality control labs, pharmaceutical laboratories, microbiological & biotechnology labs, college & classrooms.