We offer highly portable and smart Non Destructive Technology Instruments (NDT Instruments). These instruments are known for their impeccable creation and sturdy built. We have great proficiency in offering NDT Instruments at market leading rates.

Digital Coating Thickness Gauge (Ferrous)

Application :

Used to check the coatings as Chrome , Paint , Galvanizing , electroplating on Ferrous work peices.
Used to check Non Ferrous coatings on Ferrous work peice.

Technical Details :

Alternate names	Dry Film Thickness Guage ( DFT Meter )
Alternate Name	Elcometer
Oerating principle	magnetic induction (F)
Measuring range	0-1000um
Resolution	0.1/1
Accuracy	±1-3%n or ±2.5um
Min. measuring area	6mm
Min. sample thickness	0.3mm
Battery indicator	low battery indicator
Metric/ imperial	convertible
Power supply	4x1.5V AA (UM-3) battery
Auto power off
Operating conditions	0 to 45o
Dimensions	160x68x32mm
weight	250g(not including battery)
Optional accessories	other range 0-200um to 15000um
Packing	Plastic Box
Guarantee	6 Months without abuse . 90 days on the Cable
Calibration	Optional

Send Enquiry

Digital Coating Thickness Gauge (Ferrous)

Application :

Used to check the coatings as Chrome , Paint , Galvanizing, electroplating on Ferrous work peices.
Used to check Non Ferrous coatings on Ferrous work peice.

Technical Details :

Alternate names	Dry Film Thickness Gauge ( DFT Meter )
Alternate Name	Elcometer
Oerating principle	magnetic induction (F)
Measuring range	0-1000um
Resolution	0.1/1
Accuracy	±1-3%n or ±2.5um
Min. measuring area	6mm
Min. sample thickness	0.3mm
Battery indicator	low battery indicator
Metric/ imperial	convertible
Power supply	4x1.5V AA (UM-3) battery
Auto power off
Operating conditions	0 to 45^o
Dimensions	160x68x32mm
weight	250g(not including battery)
Optional accessories	other range 0-200um to 15000um
Wit RS232 Data output port
Software & Cable Extra

Packing	Plastic Box
Guarantee	6 Months without abuse . 90 days on the Cable
Calibration	Optional

Send Enquiry

Digital Coating Thickness Gauge (Non Ferrous)

Application :

Used to check the coatings as Chrome, Paint, Galvanizing, electroplating on Non Ferrous work pieces.
Used to check Non Ferrous coatings on Non Ferrous work peice as Aluminum, Copper, Brass etc.

Technical Details :

Alternate names	Dry Film Thickness Guage ( DFT Meter )
Alternate Name	Elcometer
Oerating principle	eddy current (NF)
Measuring range	0-1000um
Resolution	0.1/1
Accuracy	±1-3%n or ±2.5um
Min. measuring area	6mm
Min. sample thickness	0.3mm
Battery indicator	low battery indicator
Metric/ imperial	convertible
Power supply	4x1.5V AA (UM-3) battery
Auto power off
Operating conditions	0 to 45^o
Dimensions	160x68x32mm
weight	250g(not including battery)
Optional accessories	other range 0-200um to 15000um

Packing	Plastic Box Packing
Guarantee	6 Months
Calibration	Optional

Send Enquiry

Digital Coating Thickness Gauge (Ferrous / Non Ferrous)

Application :

Used to check the coatings as chrome, paint, galvanizing, electroplating on Non Ferrous work peices.
Used to check non ferrous coating on ferrous work peices.
Used to check non ferrous coatings on non ferrous work peice as aluminum, copper, brass etc.

Technical Details:

Alternate names	Dry Film Thickness Guage ( DFT Meter )
Alternate Name	Elcometer
Oerating principle	magnetic induction/eddy current (F/NF)
Measuring range	0-1000um
Resolution	0.1/1
Accuracy	±1-3%n or ±2.5um
Min. measuring area	6mm
Min. sample thickness	0.3mm
Battery indicator	low battery indicator
Metric/ imperial	convertible
Power supply	4x1.5V AA (UM-3) battery
Auto power off
Operating conditions	0 to 45^o
Dimensions	160x68x32mm
weight	250g(not including battery)
Optional accessories	other range 0-200um to 15000um

Packing	Plastic Box Packing
Guarantee	6 Months
Calibration	Optional

Send Enquiry

Ultrasonic Thickness Gauge (UTG 100)

Application :

Used for measuring thickness and corrosion of pressure vessels, chemical equipment,boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, power station,and machine manufacturing.
This instrument is used for enclosed vessel, work peice, which cannot be cut to check the Thickness.

Technical Details :

Alternate Name	D Meter
Measuring range (metric/imperial)	1.2-200mm,0.06-8inch
Oerating principle	Ultrasonic
Materials measured	only 11 types of materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron
Lower limit steel pipes	15x2.0mm, ?20x3.0mm determined by the transducer
Calibration block	included
Resolution	0.1mm
Accuracy	±(0.5%n+0.1)
Power supply	4x1.5vaa(UM-3) battery
Battery indicator	low battery indicator
Operating conditions	0 to 45^o
Dimensions	160x68x32mm
weight	208g(not including battery)
Optional Accessories	6M ø 6mm thin Material probe:Measuring range(steel): 1.0 50.0mm
Operating temperature	-10 ~ +60
5M - 12high temperature probe	Measuring range(steel): 1.0~225.0mm(normal temperature)
Measuring range(steel)	4.0~100.0mm (high temperature)

Packing	Plastic Box
Guarantee	6 Months
Calibration	Optional

Send Enquiry

Ultrasonic Thickness Gauge (UTG 101)

Application :

Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc. In industries of petroleum, shipbuilding, power station, and machine manufacturing.
This instrument is used for enclosed vessel, work peice, which cannot be cut to check the thickness.

Technical Details :

Alternate Name	D Meter
Measuring range (metric/imperial)	1.0-200mm,0.05-8inch
Oerating principle	Ultrasonic
Materials measured	any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron and other materials
Sound velocity	500-9000m/s
Lower limit steel pipes	15x2.0mm, ?20x3.0mm determined by the transducer
Calibration block	included
Resolution	0.1mm(TM8812C 0.01mm)
Accuracy	±(0.5%n+0.1)
RS232C interface	with RS232C
Power supply	4x1.5vaa(UM-3) battery
Battery indicator	low battery indicator
Operating conditions	0 to 45^o
Dimensions	120x62x30mm
weight	164g(not including battery)
Optional Accessories	6M ø 6mm thin Material probe:Measuring range(steel): 1.0 50.0mm
Operating temperature	-10 ~ +60
5M - 12high temperature probe	Measuring range(steel): 1.0~225.0mm(normal temperature)
Measuring range(steel)	4.0~100.0mm (high temperature)

Packing	Plastic Box
Guarantee	6 Months
Calibration	Optional

Send Enquiry

Surface Roughness Tester

Features

Pocket-size & economical price
Large measuring range suitable for most materials
Measures flat, outer cylinder and sloping surface
Both Ra and Rz parameters in one instrument
Features external calibration at keyboard
Standard conform to ISO and DIN
Rechargeable batteries, work while charging
It is equipped with Li-ion battery and back light

Technical Specification

	TR110
Roughness parameter	Ra, Rz
Tracing length	6mm
Tracing speed	1.0mm/sec
Cut-off lengths	0.25mm/0.8mm/2.5mm
Evaluation length	1.25mm/4.0mm/5.0mm
Measuring range	Ra: 0.05-10.0µm Rz: 0.1-50µm
Tolerance	±15%
Repeatability	<12%
Filter	RC analogue
Pick-up	Piezoelectric
Radius and angle of the stylus point	Diamond, Radius : 10± 2.5µm Angle: 90 (+5 or -10 )
Operating temperature	0-40^oC
Humidity	<80%
Storing temperature	-25 ~60^oC
Vertilation	Grade 3
Power supply	3.6V/2XNiMh-batteries
Backlight	No
Charger	DC 9V, 8 - 12 hours (recharging time)
Dimensions (LXWX H)	125X73X26mm
Weight	200g

Send Enquiry

Surface Roughness Tester

Features

Applicable in production site, laboratory and workshop in factory
Easy operation menu and large LCD display with back light
Li -ion rechargeable battery
Pickup position indicator
Conform to ISO standard, compatible with DIN, ANSI and JIS standard
Advanced software for TR200 and TR220 is available
Lots of delicate optional accessories are supplied making user’s measurement more efficient and easier

Roughnes parameters	Ra, Rz, Ry, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSm, RSk, Rmr,
Assessed profiles	Primary profile (P)
Measuring system	Metric, English
Display resolution	0.01µm
Data output	RS232
Measuring Range	±20µm, ±40µm, ±80µm
Cutoff length (L)	0.25mm / 0.8mm / 2.5mm/Auto
Evaluation length	1~5L (selectable)
Tracing length	(1~5)L + 2L (selectable)
Digital filter	RC, PC-RC, Gauss, D-P
Max. tracing length	17.5mm/0.71inch
Min. tracing length	1.3mm/0.051inch
Pick-up	Standard pickup TS100, inductive, Diamond stylus radius 5µm , angle of stylus 90^oC
Tolerance	±10%
Repeapility	<6%
Power	Li-ion battery rechargeable
Dimensions	141mm X56mm X48mm
Weight	480g

Send Enquiry

Ultrasonic Thickness Gauge TT 100

Features:

Portable size and easy operation
Suitable for any metallic and non-metallic materials ultrasonic can go through
Self-compensating of nonlinearity function is supplied for correction of pickup nonlinearity
10 measuring values recorded
Optional 2.5MHz, 5MHz and 7MHz transducers are available
Clear 4-Digit LCD display with backlight
5 pre-set sound velocities for repeating applications
mm / inch selectable

Technical Details :

	TT100	TT110	TT120	TT130
Measuring range	0.75 -300.00mm (steel)
Measuring range for steel pipes	Ø 20 3.0mm
Diameter of transducer	Ø 10 (standard) Ø 6 (optional) Ø 12(optional)
Display resolution	0.1mm			0.01mm
Calibration	4.0mm steel base plate integrated
Tolerance	± (1%H+0.1) mm (H means the thickness of tested piece)
Measuring units	mm/inch
Sound velocity range	1000-9999m/s		5900 m/s	1000-9999m/s
Display	4-Digital LCD with backlight			4-Digital LCD
Surface temperature	-10^oc to +60 ^oc		-10 ^oc to +300 ^oc	-10 ^oc to +60 ^oc
Battery indicator	Low battery voltage indication
Power supply	2 Pcs. AA batteries 1.5V
Working time	250 hours
Dimensions	126mm X 68mm X 23mm
Weight	Approx. 250g including batteries

Packing	Plastic Box
Guarantee	6 Months
Calibration	Optional

Send Enquiry

Advanced Technocracy Inc.
Mr. Kunal Chopra (CEO)
Atico House, No. 5309, Grain Market, Near B. D. Senior Secondary School
Ambala - 133001, Haryana, India

Contact via E-mail

Contact via SMS