Pharmacy Lab Equipments

A standard and accurate model of Abbe- Refractometer for measurement of refractive index. Dispersion and sugar concentration scale reading up to third decimal, but can be easily estimated to the fourth decimal place complete in wooden box.

• Measuring Range : nD 1.3000 to nD 1.7000
• Accuracy : 0.00
• Sugar percentage : 0 to 95% in steps or 1 div.
• Dispersion : nD 0.0005

(Actophotometer) improved and solid state type with six photo cells for measuring spontaneous or induced activity with digital totalizar or counter.

With quick adjustment and clamping nut; 15” stainless steel upright. 3/8” dia.

Advanced rotary microtome (latest ‘spencer’ - type) : Model 5004 is most modern and dependable sectioning equipment specially designed for precise sectioning of tissues upto 1 micron thickness. It has a front located feed indicator with Cam drive system for accurate feed setting from 1-50 microns in steps of 1 micron each. Some of the prominent feures include independent fed mechanism with automatic safety device. Universal knife holder with lateral movements to permit use of complete knife edge, ball and flangs type object holder for accurate centering of the specimen and full swinging protective cover for easier cleaning and lubrication. The equipment assures smooth operation through out the life of the instruments and latest machining techniques are used in manufacturing individual and latest machining techniques are used in manufacturing individual components in addition. The microtome razor is fabricated from from imported fine grain steel alloy tested for microstructures and the razor is heat treated to maintain optimum strength and sharpness.

Supplied complete with following accessories:

• One Knife Razor 120mm with back and handle.
• Three object Holders 7/8”, 1-1/8” & 1-1/2” dia.
• One honing glass plate 10” x 2” (approx)
• One No. Oil can for lubrication.
• One Dust cover & wooden cabinet.

Made from borosilicate glass with and without platinum wire.

(Wooden with sunmica) :

Size available

a) 3’
b) 4’
c) 5'

Installation if required will be charged extra.

Automatic electrically heated for making water for injection complete with heater embedded in spiral glass tube, complete with CI heavy base, Rod, Clamps, Plug and board etc. A Grade borosilicate glass Flask capacity 3 lit. Cap. & 5 lit cap.

• Single Stage
• Double Stage
• Triple Stage ( Triple Stage is generally use, when we require water for injection.)

Note : Auto cut for above will be extra cost.

Ampule filling and sealing device : hand operated without gas cylinder for sealing, but supplied with gas burner (filling capacity from 2 ml. To 50ml. )

Ampule  filling & sealing machine (electric operated)same as above but completely motorized with capacity adjustments 

Jet needle type, consist of 6 S. Steel needle jets fixed on a brass (chromium plated) pipe of  12.5 mm dia with side tap and serrations for fixing rubber with tap water. Springs loaded ampul holding arrangement for various sizes of ampuls. With stainless steel bottom tray on stand.

a) Mark (Radiant Heat or Tail Flick Type) : It provides pain stimulus by heated nichrome wire in a Rat’s tail to determine analgesic effect of drugs. Complete with one spare element to work on 220V A.C.

b) Mark 2 (Contact Heat Type) with digital temperature provides plain stimulus in Rat’s tail by heated nichrome strip and supplied with Temp. Probe works on 220V A.C.   

Mark 3 : Eddy’s Hot plate consisting of 8” (20 cms appox.) round heating surface with perspex enclosure and solid state temperature controller with Micro-controller based Digital Temperature Indicator controller to set surface temp. Between 30° to 80° C.


Mark 4 :  Radiant heat type With Digital Chronoscope. Same as  mark-1, but with foot switch & Digital Time Interval Counter. 

Very sensitive, Our own make, 200 gm weighing capacity, accuracy 0.1 mg with sunmica top in show case (Teak wood). Varanasi make also available on request. 

Particle size Determination apparatus, (Sedimentation pipette, Anderson) consisting  of 500ml. Graduated cylinder, graduation from 0 to 20cm. And fitted with 10ml. Pipette with three way stopcock, the tip of pipette at the level of 0 mark at the cylinder.

The antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibited zone in petri dish.

Size 95x50x50 cms with sloping front. Acrylic sheet front and side doors (full visible Transparent) 3’ germicidal ultraviolet tube and 2’ fluorescent tube for white light with necessary choke blast, starter and switches fitted. Also main lead and plug provided. Two holes with rings and sieves for insertion of arms provided.

(B) -do- but small size, fitted with small tube. 

a) Set of 60 balls. (Kids)b) Set of 120 balls. (Junior) c) Set of 360 balls (Senior)

Portable entirely made of seamless aluminum with safety valve pressure gauge, high class quality gasket pressure 15 Ibs, handle and iron stand also provided size 12”x12”. (300x300mm.) Electric operated. Autoclave SS. Specification as above but chamber made of stainless steel size 12”x12”.

Inner chamber made of sturdy stainless steel and outer chamber made of heavy chrome plated with double safety valves, large dial pressure gauge with outer M.S. Jacket : Following Sizes are available. SS Jacket also available. (a) 12”x12” (b) 14”x22” (c) 16”x24” (d) 18”x24” (e) 22”x30”

Inner chamber made of sturdy stainless steel and outer chamber made of heavy brass sheet. Outer jacket made of MS/SS. With heavy chrome-plated ring & lid. Fitted with double safety valves, large dial pressure gauge, steam release valve, water pouring funnel and water level attachment.
Following Sizes are available. SS Jacket also available on request.(a) 12”x20” (b) 14”x22”(c) 16”x24” (d) 18”x24”(e) 22”x30”
Pedal lifting arrangement at extra cost.

Designed for low temp. Incubation and routine determination of biochemical Oxygen Demand (B.O.D.) The unit is composed for triple walled chamber with a thick layer of fine glass wool to prevent loss of heat. For lower temperature work, a cooling unit is provided at the lower portion of working chamber and heating arrangement has been made in the inner chamber for work at higher temperature. The temperature varies from 5°C to 50°C adjustable to any desired point by means of a high precision digital temperature controller indicator within the variation of 1°C Air Circulation fan has been provided to keep the temperature uniform inside anodized/SS sheet & outer body is sprayed in white stove enamel finished or powder coated. Three removable shelves are provided. Toggle switch, digital temp, controller indicator and indicating lamps are located on the instrument for easy handling and visibility. Complete with automatic internal light, connecting cord & plug to work on 220 Volts A.C.
 Inner Chamber size of Aluminum and Stainless Steel :a) 505x415x830mm (20”x16.5”x32”)
(W x D x H)  (6.1 c.ft.)b) 565x565x865mm (22.5”x22.5”x34.5”) (10 c.ft) c) 650x580x900mm (26”x23”x35”) (12 c.ft) Other sizes on request.

For mixing & grinding, electrically operated having capacity of few gms to 1kg & 2 kg. Fitted with geared Motor with max. Speed of 80 rpm. The jar is made of SS and having steel balls of v different sizes to be put in jar for mixing & grinding pesticides powder. Jar is interchangeable and easily removable, light in weight and compact unitworking on 220V AC with cap. 1KG.(b) -do- S.S Drum 1kg capacity with digital RPM meter.(c) -do- S.S Drum 2kg capacity(d) -do- S.S Drum 2kg capacity with digital RPM meter.

With removable glass or S.S pan suitable for weighing 5,10 & 111 gms with 0.1gms resolution on index plate. Sensitivity 5mg. (Known as Triple Beam Balance).

Balance For Weighing Small Animals
Cap 5kg, sturdy and easy to use. Other ranges also available on request.

BM-I Binocular observation head inclined at 45° of the horizontal at 360°. Assembled from IMPORTED PRISMS to ensure highly accurate colimation for strain free observation. Adjustable interpupillary and dioptic distance. Heavy duty quadruple revolving nosepiece with with clickstop. Fitted withco-axial mechanical stage. Built in base HALOGEN illumination system 6V-20W lamp. Electronic system for variable light stepless control. Also provided with plano concave reflecting mirror attachment for day-light use.
Optics : Only best quality objectives and Eyepieces are supplied to provide.finest performance. These are Parafocalised and percentered with microscope after the most strignet test.


BM-I (a) Supplied with optics. Eyepiece : H 5x (Paired) & H 10x (Paired) W.F Objective : 5x, 10x, 45x, 100x (Spring loaded)
BM-I (b) Supplied with optics but 100x imported oil immersion assembled by us.
Eyepieces : H 5x (Paired) & H 10x (Paired) W.F Objectives : 5x, 10x, 45x, 100x (Spring loaded)
BM-1 (c) Supplied with all IMPORTED DIN Standard optics assembled by us as under.
Eyepiece : 10x W.F.(Paired) & H5X(Paired) W.F Objectives : 5x, 10x, 45x, 100x (Spring loaded)
BM-I (d) Supplied with all IMPORTED JAPANESE make objectives. Eyepiece :  5x W.F.(Paired) & H 10X(Paired) Objectives : 5x, 10x, 45x, 100x (Spring loaded)
Supplied in THERMOCOL BOX/Wooden-cabinet with instruction manual. 

BM-I (a) Supplied with optics.Eyepiece  : H 5x (Paired) & H 10x (Paired) W.F Objective : 5x, 10x, 45x, 100x (Spring loaded)
BM-I (b) Supplied with optics but 100x imported oil immersion assembled by us.Eyepieces : H 5x (Paired) & H 10x (Paired) W.F Objectives: 5x, 10x, 45x, 100x (Spring loaded)
BM-1 (c) Supplied with all IMPORTED DIN Standard optics assembled by us as under.Eyepiece : 10x W.F.(Paired) & H5X(Paired) W.F Objectives : 5x, 10x, 45x, 100x (Spring loaded)
BM-I (d) Supplied with all IMPORTED JAPANESE make objectives.Eyepiece    :  5x W.F.(Paired) & H 10X(Paired) 
Objectives : 5x, 10x, 45x, 100x (Spring loaded)
Supplied in THERMOCOL BOX/Wooden-cabinet with instruction manual. 

Fitted with high speed motor, with two Nos. Of stainless steel jar.

Bottle Washing Machine : is fabricated in a MS sturdy frame with SS wash basin and fitted with brass swan neck water tap (heavy chrome plated). 3 spindle with different sizes of washing brushes to wash 3 types different types of bottles simultaneously. Spindles are rotated with the help of DC Motor and speed in adjustable. Operates on 220V A.C. Single phase.

Fabricated from sheet metal or die casted. Available in different sizes.

Bulk Density Apparatus
Specially designed to study, the packing down of powder beds of different pharmaceuticals and chemicals in the process of tablet manufacturing, capsule filling & cosmetics. Installed with an automatic device for preset of strokes. Gear driven Noiseless and strudy motor, also provided with an electrically timer Elengantly designed for smooth operation electrically operated on 230V AC, 50 Hz. 

Digital Model with programmable drop counter and buzzer. Rest of the specification are same as above.

(a) (Prismatic) Lemon optical glass prism specially designed hangs over the eye- piece of the microscope. The pencil on the graph is visible  moving on the image is drawn on the graph, very compact in design, Prism will be silver coated one side and it will be packed in velvet box. 

b) Mirror Type : with this unit it is possible to draw the image seen in the microscope. The mirror reflects the pencil point image into an abbe prism clamped over the eye-piece and superimposes it up on the specimen image. The prism box is hinged for quick change of eye-piece for normal observation complete in velvet box. 

A versatile lever operated semiautomatic machine for various operations with levers in order of 1. plates for putting of capsule by hand 2.removal of caps 3.filling of powder by dispensing of brush pressing 4.fixing of caps and sealing 5.Injection of capsules. contact parts of stainless for 100 capsules of size 0 to 2 or 5 (anyone size in order).
 -do- capacity of 300 capsules at a time, made to order.

(Electric operated) with 4 tubes.
(b) -do- with 6 tubes.

For keeping 100 charts in rolled & hanging position Cabinet frame of MDF finished with laminated sheet. 10 hangers with 10 hooks on each hanger provided inside top. Hangers slide on wooden channels for convenient sorting of charts. Hinged door with locking arrangement. Can be olded into 25cm high parcel and can be assembled by tightening just 8 screws. Beautiful spirit polish finish.
 Model No.
ATI-5042-01 For 100x75 cm had made charts.ATI-5042-02 For Bio-Visual charts.ATI-5042-03 For 70x50 cm. Handmade Charts on Shelves.

Human physiology : (Set of 25)

1. Human Anatomy
2. Human Skeleton
3. Human Joints
4. Human Digestive system
5. Human Nervous system
6. Human Circulatory system
7. Human Excretory system
8. Human Respiratory system
9. Human Ductless (Endocrine) Glands
10. Human Lymphatic system
11. Human Antonomic Nervous system
12. Human Eye
13. Human Ear
14. Human Nose
15. Human Tongue
16. Human Larynx
17. Human Teeth & Decay
18. Human Heart
19. Human Blood
20. Human Skin
21. Human Brain
22. Human Development system
23. Human Development of Embryo
24. Human Types of placenta
25. Human Kidney T.S. and L.S.

Charts (pharmacognosy) : (Total 75)
Chart (pharmacognosy crube Drugs) different type.

1. Bahera
2. Arachis oil
3. Papain
4. Rose hips
5. Shankhpushpi
6. Shark liver oil
7. Cotton
8. Aswagandha
9. Senna leaves
10. Tamarinds
11. Brahmi
12. Black catechu
13. Punarnava
14. Garlic (Lahsun)
15. Rhubarb
16. Peppermint oil
17. Neem
18. Tulsi
19. Ajowan
20. Pyrethrun
21. Strophant Hus
22. Amla
23. Ground Tissue system
24. Xylem elements
25. Acacia (Indian gum)
26. Cummin
27. Coca
28. Vidang
29. Turmeric
30. Hysocyamus
31. Bitter orange peel
32. Starch
33. Nux-vomica
34. Dioscorea
35. Black peppar
36. L.H. Ergot
37. Opium
38. Aloe
39. Jatamansi
40. Almonds
41. Cannabis
42. Lemon peel
43. Vinca
44. Dermal tissue system
45. Indian colchicum
46. Picrorrhizea
47. Ginger
48. Yeast
49. Cinnamon
50. Cinchona
51. Types of stomata
52. Ipecacuantha
53. Yasaka
54. Sandal wood
55. Celery
56. Cardamon
57. Arjuna
58. Castor oil
59. Barks
60. Colchium corm
61. Valerian
62. Datura
63. Linseed oil
64. Raspberry leaf
65. Gymnema
66. Pterocarpus
67. Nutmeg
68. Trichomes
69. Digitalis
70. Kurchi
71. Chaul moogra oil
72. Tobacco
73. Aresa nuts
74. Gokhru
75. Educalyputus (Charts other than this list can be made on request)

Double pans weighing capacity 200 gms accuracy 0.2 mg ; Sunmica Base

For proper and convenient drying of smoked and varnished paper sheets upto 40” long and 10” width, with stainless steel radiating arms and bottom tray for collecting any drip will take upto 24 varnished papers at one time. Complete with clips.

Milky white and black screen fitted on a base board with diffused light arrangement overall dimensions are 23”x15”x18”. A Stainless  upright with adjustable slide arm with clamp magnifier, main cord and plug. 

Colony Counter: Digital Display, these are designed to provide light effects for multipurpose viewing in the bacteriology, virology Mycology labs. An ideal instrument for counting bacterial and mould colonies in culture work. It provides unifrom glare free illumination to minimise the strain on eyes and clearly defines even small colonies. A 100mm dia lens covers the entire illuminations field and its magnification assures highly accurate results. Counting plate with standard wolfhugel ruling ensures clearly differentiated and sharply defined colonies. Supplied complete with counting with counting plate, lens, cord and plug.
This Model is fitted with automatic 4 digits LED Digital Display. It minimize the strain of counting. Each tough of MARKING PENCIL in the petridish increments the colony by pen and the glowing L.E.D Digital Display depicts the total colony count, thus relieving the technician from the tediuos task of counting and eliminating the chances of error, Maximum colony count possible upto 9999. Provided with a RESET, Buzzer, ON/ OFF switch, counting pencil, cord and plug.
 Suitable to work on 220V, single phase, 50 Hz, AC Supply

Stroke type, barrel and piston arrangement with stroke setting for various capacity of filling of tubes (from 5 gms to 50 gms.) Detachable nozzles provided for each separate capacity. All contact parts are of stainless steel. Hopper is also of stainless steel. Built on heavy cast iron body, hand lever operated. b) Motorized

Doubled walled heavy duty with forced air circulation thermostatically controlled, Temperature up to 250°C accuracy ± 2° C to ±5°C with dial type thermometer. To work on 220/230 or 440 V A.C.
a) 4 30x840x650mm 8 trays of 16”x32”x1 1/4”b)430X840X910MM 12trays of 16”x32”x1 1/4”c)910x840x910mm 24trays of 16”x32x1 1/4”d)960x1270x1450mm 48trays of 16”x32”x11/4”e)960x1700x1700mm 96trays of 16”x32x1  1/4”
Note : Price are without trays. Spare each tray at extra cost

(Conductivity Meter) Digital Type : Reliable & Accurate Test instruments for municipal & Industrial Aqueous solutions. Display : 4 digit LED Range : Conductance 0.1 micro mhos to 1000 mmhos in 5 Ranges 0- 200m mhos, 2 m mhos, 20m mhos, 200m mhos, 1000m mhos
Resistance : 0.1 ohm to 2m ohms in 5 ranges 0 to 200 ohms  & 2Kohms.Accuracy : Conductance : 0.5% of range +/- 1 digitResistance : 0.5% of range +/- 1 digit
Cell Constant : Using potentiometer on adjustment display ( digital setable).Oscillator : 50Hz and 1000 Hz  Auto-selectable (Excitation Input Frequency Power Supply :220/230 volts +10% 50Hz AC. Built in stabilizerSupplied with conductivity cell, Dust cover and instruction manual.
Optional Arrangements :-
1. Automatic temperature co-efficient compensation from 0 to 70°C with PT 100 sensor.2. Temperature indication 0 to 100°C3. Recorder output facility.

Capacity 1000ml. With lid, drain cock, stainless steel sieve on 3-leged stand. Other capacities and glass percolator also available on request.

All brass, chrome plated.
Model No. Set of
a) 3, Heavy type
b) 3, Routine
c) 6, Heavy type
d) 6, Routine
c) 12, Heavy Type
f) 12, Routine

With cork borer set of 12 and an ejector, hand operated with screw type shaft

Small type. Made of porcelain material.
A) Capacity : 5ml (Without lid) 10ml (Without lid) 15ml (Without lid) 18ml (Without lid) 25ml (Without lid) 30ml (Without lid) 50ml (Without lid) 80ml (Without lid) 100ml (Without lid) 200ml (Without lid) 

Used for Homogenous mixing of dry powder syrup & lubricants of granules etc. Stainless steel vessels & blade both rotating at different speeds. Complete with motor & starter etc. Capacity 5Kg., Driven by ½ H.P motor.
Special Features :Efficient master batch & colour mixing.Provided with Auto stop timer. Easy charging & discharging materials.

Cup Vortex Mixer- Test tube mixer : To accelerate the mixing of solution in test tubes Short, rapid accentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. Particularly efficient for dislodging sediments from tips of centrifuge tube. The housing is 5”x 8”x7”. The Vacuum Rubber at bottom prevents the machine from walking. Complete with speed control, Cord and ON/OFF Switch and indicator to work on 220V. 1 Ph, 50Hz, A.C. Supply.

With ground cover knobbed. Dia cms.
1. 10 2. 12.53. 15 4. 20 5. 25

Polypropylene (Plain)
1. 150mm plain PP/PC
2. 200mm plain PP/PC
3. 250mm plain PP/PC 

Range 340 to 960mm. With facility for Automatic concentration, % transmission and Absorbance measurement. Wave length resolution 5nm, 3 / ½ digit L.E.D display with set of glass cuvettes.Note : Above spectrophotometer can be supplied with a set of square cuvettes at an additional cost.b) U.V :- VIS. Spectrophotometer(Single beam) : is a high resolutionReliable & versatile, single beam range 190 to 1000 nm with facility for automatic concentration, % Transmission, Absorbance measurement.  Motorized micro-controller based wave length selection, with 4 digit LED display for wave length and 3/ ½ digit LED data display. It has four position sample holder with with position selector. Control for 10mm path length cuvettes. 

Disintegration Test APP, I.P. Standard (double basket) : a) The test equipment work on up down movement of tablet in medium of water kept at 37°C. Built in a M. Steel powder coated cabinet of 17”x12”x9” high which housed a geared motor for the vertical shaft drive the shaft moves up and down by 50 to 60mm at speed of 28-32 strokes per minute. On the upper and of the shaft fitted a horizontal strip with clamp on either side. These clamps hold glass vessels open at both ends and with stainless steel wire gauge with rubber rings at the lower end, which dips in water. Two independently thermostatically controlled hot plate rating 65 watt are fixed on the top of the cabinet upon which neon indicators for motor hot plates are fitted on a panel. Mains fuse with two meters mains cord and plug provided. Work on 220 volts A.C. Mains.
b) -do- Double Basket Digital Temp. Controller (2 Nos.) & Timer to set the operation time. ( with water bath also available)

Three baskets digital temp. & timer with water bath (without water bath also available).

Set of 17 instruments Export Quality Standard make.

Complete with all brass part & with 10x & 20x Eye Pc. Packed in ply wood cabinet. ( Other models also available)

The apparatus consists of 4 parts. A water bath with 500 watt heater covered 1000ml. Vessel made from unbreakable polycarbonate and digital temperature control. Variable speed motor. With 30cms longs stainless steel shaft. A cylindrical stainless steel basket and a membrane fixing attachment. Water bath is made of imported thick Acrylic sheet with transparent cover at top. Temperature of the bath is maintained at 37°C with an accuracy of ± 1°C .A cylindrical glass vessel of 1000ml. Capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes. One hole placed in the centre. The regulating device that the allows the speed to be varied from 25 to 250 R.P.M. The shaft is 6 mm dia. 30 cms on with basket fitted at end rotates smoothly and without any significant wooble. The basket consists of two parts one of which is attached to the shaft. It is of solid metal except for 2 mm vent and is screwed on the main shaft. Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples. The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36mm x 25mm dia. The equipment is workable on 220 volts 50 C/S A.C.
b) -do- same as above but Analog type single stage.
c) -do- same as above analog/digital type double, three, six and eight stage.

(Made of stainless steel ) 4 to 5 lit. Cap. With wall bracket etc. JointlessB) -do- thermostatically controlled.

(Made of stainless steel) heavy gauge 6 to 8 lit. Cap. With wall bracket etc. Jointless. 

Consists of two S.S cones welded with a cylindrical shell and having charging and discharging at opposite ends mounted on a channel stand. Drive is by means of an electric motor & reduction gear box through a centre shaft. The cone is mounted on plummer blocks for easy movement there by ensuring through mixing. To facilitate easy movement of the cone while charging and discharging of the large units, a special inching arrangement is provided with the unit. Motor used is single phase or three phase.
Capacity Drive H.P.
i) 5 kg. 1 phase
ii) 10 kg. 1 phase
iii) 25 kg. 1 3 phase
b) Hand Operated.

This instrument is widely used in colleges and schools for simultaneous viewing of the object by teacher’s and students. A detachable and rotatable pointer moves in all direction to facilitate demonstration and is visible in both the eye-pieces. The eye pieces on the extension tube can be focused in independently. The extension tube is suitable to facilitate viewing. Complete and supplied in velvet box.

A Perspex organ bath with fine thermostatic temperature control. Electric stirrer; and complete set of accessories, making it a versatile unit for all research work, bath 12”x9”x8”, with leak proof dovetailed joints, resting in strudy metal frame; top of the bath carries a 1’x3/8” thick band,  for fixing accessories. Inside the bath is a metal sheathed heating element (easily replacements) controlled by means of a fine adjustable thermostat with sensitivity ± 1°C.
Standard components are :-
i) Double set of glass inner vessels.
ii) Oxygen tubes
iii) Warming Coils
iv) Two Stainless steel capillary levers.
v) Four stainless steel uprights lewith bose heads,
vi) X blocks.

Same as Double Unit Organ Bath but fitted with micro-controller based programmable digital temperature controller which provided accuracy of ± 0.2°C.

Made from Die cut sheet to hold the Kymograph paper on drum.

Provide 50 Hz alternating current stimulus for producing minimal and super maxial seizures required in the assay anti-convulsant and epiteptic drugs complete with one pair corneal electrode 4,6 of 8mm cups and one pair of ear clips, works on 220C A.C. Fitted with digital voltmeter and programmable digital measurement.

It is available in five models.
a) Student Stimulators Transistorized : Output 0-25 DC in two steps, duration 5 or 1.5ms frequency 5 to 100 c/s in 11 steps, models single repetitive or an external trigger, for 220V 50HZ.b) Student Electronic Latest Design :
i) frequency continuously variable from 0.1 Hz to 100Hz. In 3 decades of 0.1 to 1,1 to 10 and 10 to 100 selectable through push- button controls and  one continuously variable control.

(ii) Output Voltage continuously variable from 0 to 30V in two steps of 1 to 3 and 1 to 30, selectable through a switch.
(iii) Fixed pulse duration 1m sec,
(iv) Single & external trig. Single pulse facility.
(v) Sensitive speaker to give audible indication or each output.
(vi) High stability new circuitry minimises external interference.
c) Stimulator General Purpose :  Provides rectangular pulse of controlled amplitube 0.1- 100V, Frequency 0.1-1000 Hertz & width 0.01  to 100m see. All solid state latest model.
d) Research Stimulator with R.F. Isolation Unit : Provides rectangular pulse of controlled polarity, Amplitube 1.5mV to 150V; Frequency 0.1 to 10 KCS. Delay 10 micro sec. to 1 sec. & width 10 micro sec. to 1 sec. All solid state. 

Useful for suspension etc. The machine is available in 2 models. Both units are supplied with an induction Motor with a speed Regulator. The rotor is connected directly to the motor and both are mounted on an adjustable stand such that the unit can be raised or lowered as desired. Type 0.25 HP 0.5HPa) Silverson

Temp. Range 10°C to 60°C, accuracy ± 0.5°C, Humidity 30% to 95% ± 3%, Inner chamber made of stainless steel.
Working chamber size
a) 450x450x450mm (18”x18”x18”)
b) 600x600x600mm (24”x24”x24”)
c) 900x600x600mm (36”x24”x24”)
d) 700x450x450mm (28”x18”x18”)

Epirex : A modern episcope with 300 W halogen lamp. Epirex is the most modern Episcope which provides exceptional brilliant image of all opaque objects with its powerful 300W halogen lamp. Its mutilayer coated lens set of three anastigmatic lenses and optically true surface coated mirrors to ensure highest parameters of resolution and optically true surface coated mirrors to ensure highest parameters of resolution and exceptionally brilliant screen projection of object. Simplicity in structural design, powerful motor driver cooling system & heat absorbing filters ensure high degree of operatability. Episcope accepts books, pictures, maps, diagrams, messages & coins etc. Upto size 15x15xm It is equipped wit a safety micro switch which switches off the 300W halogen lamp when the object carrier is shifted out to place the object for projection. Simultaneously a pilot lamp lights to illuminate the object carrier for convenient positioning of the original object. As soon as the carrier is shifted back to working positioning, the pilot lamp switches off automatically and the 300W projection -lamp is switched on. Supplied complete with lens- holder, cleaning cloth / Duster and operating instructions.

(Bottle filling machine) electric operated having filling cap. 50 to 300ml. complete M.S. Body.
(b) Manually Operated Capacity 50 to 300 ml. *S.S. Body also available on request. 

Fitted with vacuum pump include non return valve & safety guard, filtration flask 2 lt. Capacity fitted with buchner funnel (porcelain) & rubber tubing (without filters).

Digital flamephotometer with filters (Na & K) 2 ½ digit LED display (ppm) along with compressor and other accessories. Ca & Li Filters can be provided on request.
b) Spare interface filter Na, K, Li, & Ca each can be provided at extra Charges.

Used to determine the durability and abrasivness of tablets. A transparent perspex drum ( made of imported perspex sheet 6.4 mm thick) 300 mm dia x 35 mm. Deep and - white cover disc and nut, also a radial shaped fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating. Thus the tablets rub against each other without any hard impact. The drum rotates at a fixed speed of 30 R.P.M. By a geared motor and the rotation period is controlled by a timer ( imported time switch duration 1 to 15 minutes). The motor unit is housed in a elegant shaped steel cabinet with shaft extended on one side upon which the drum rotates. Switches with neon indicators and time switch are fitted on a panel and works on 220 volts 50C/s  A.C. Digital models are also available with programmable timer or programmable revolution counter.
 b) -do- same as above, but with double drum analog/ digital.

Two sizes of 6”x4” and 9”x6” a) 9”x6” with tie in elastic bands under which the subject can be quickly slipped in, with lead weighted rests to prevent floating in the tray.a) 6”x4” Size supplied with clamp for fixing in stand.

Reinforced stainless steel sieves fixed in wooden frame size 9”x7” mesh size 8, 10, 12 or 20 anyone.* Other mesh sizes on request.

Extraction equipment : Extraction capacity 200 ml. Flask capacity 500ml. With standard joints made from Borosil glass.
(b) -do- fitted with Heating Mantle, Stand & Clamp

Table fixing with hardened grinding disc, provisions for coarse and fine grinding size.

Heating Mantles: Heating mantles ( made of glass yarn) with ON/off switch. Available in following sizes.
Single Size Watt
1. 50ml 60
2. 100ml 60
3. 250ml 150
4. 500ml 200
5. 1 lt. 300
6. 2 lt. 450
7. 3 lt. 450
8. 5 lt. 600
9. 10 lt. 2x500
Note : These mantles can be supplied with sunvic energy regulator at extra cost.

A compact Histamine Aerosol apparatus consisting of a clear perpex exposition chamber divided in two sections an all glass neubilizer and dial type sphygmomanometer for assay of antihistamines drug on guinea - pigs etc.

Brass chrome plated. Model No. Size mm a. 12 b. 18 c. 25

(Oven) : Doubled walled, suitably insulated, Temp. Control from 50°C to 250°C ± 1°C by good quality thermostat, inner chamber aluminium/ stainless steel, fitted with L shape thermometer.Available in Aluminium & S.Steel in various sizes.Inner chamber size.a) 12”x12”x12” b) 14”x14”x14”c) 16”x16”x16” d) 18”x18”x18”e) 24”x18”x18” f ) 24”x24”x24”g) 36”x24”x18” (Other sizes rates on request) Automatic temperature controller digital, timer & Air Circulating Fan can be fitted at extra cost.

Round 20cm(8”) dia single plate, electrically operated.
a) Complete with three step rotary switch, plug and cord.
b) Same as above with double plates of 8” dia.
c) Hot plates rectangular electrically operated complete with 3 step switch  with cord and plug.
1. 300 x250mm (12”x10”)
2. 400x250mm (16”x10”)
3. 450x300mm (18”x12”)
4. 600x180mm (24”x18”)
Note : Energy regulator can be fitted in any model at extra cost.

Made of fiber glass material without stand. (Large size) with Hook for Hanging. b) -do- with stand 

Thermostatically controlled by Thermostat ambient to 80°C with a sensitivity ±1°C Beaded heating elements are placed in ribs at bottomand sides. Double walled inside Aluminium or stainless steel and outside mild steel sheet power coated. Door has double glass viewing, built in Horizontal L-shape thermometer with perforated adjustable shelves, two pilot lamps, ON/OFF switch. To work on 220/230 volts A.C.
Inner Chamber size a) 300x300x300mm (12”x12”x12”)b) 350x350x350mm (14”x14”x14”)c) 300x400x450mm (18”x18”x18”)

Temperature uptp 80°C accuracy ±1°C working size 16x35x30 cms.
Rack size 28x23 cms. To hold flask or tubes. Note :- Other sizes made to order.

Developed as per standard guideline provided by Central Pollution Control Board, Complete with basic equipment and standard Chimney. Different capacities available. Demo Model for colleges also available on special request.

Cast iron moulded body. All working parts of tempered steel, easily replaceable single piece wide beam, spray painted finish, one side iron moulded plate and other side scoop/pans/plates iron & brass.
Capacity: 1kg, 2kg, 5kg, 10kgMechanical Balance

A basic method for determination of moisture content, measure percent by weighing and drying simultaneously. Infra Red radiation are reflected by a bulb and its temperature is controlled by a regulator.
The balance scale is divided in terms of moisture content on wet weight basic.
Specification :Range : 0-100
Accuracy : ±0.2%
Dimension : 28x35cm
Weight : 20kg
Sample weight : 5gm, 10gm, 20gm, 25gm as required.
A.C. Mains : 220V 50Hz

A) Microprocessor K.F. Moisture Titrator with built-in magnetic stirrer, Auto computation of moisture in ppm, %age and mg H2O, storage of Date, Time, Batch no. & final results of 20 titrations. K.F. Reagent.
Dispensing by motorised process. Final results are flashed on 8 digit display. External printer attachment facility available.
B) Auto karl fischer Titrimeter (Deluxe model) having separate control and stirring units with array of 10 LED’ buzzer auto zero burette, adjustable timer, dual platinum electrode and other accessories.
C) Auto karl fischer Titrimeter with seprate control & stirrer control & stirrer unit, auto zero burette, dual platinum electrode & other accessories.
Accessories on request :-
A. Dual platinum electrode
B. Burette clear glass (10ml.)
C. Titration vessel
D. Reservoir bottle (500 ml).

Complete with delivery tube, thistle funnel and rubber corks.
Capacity ml.1. 250 2. 500 3. 1000 Spare thistle funnels & delivery tubes at extra cost.
B) Kipp’s app. In Polypropylene1. 250ml 2. 500ml 3. 1000ml

Electrically operated on 220 volts A.C./D.C compressing of mild steel tubular stand powder coated and Kjeldhal test heaters and brass condenser rack with water supply arrangement for condensers and clamps. Kjeldhal heater box is provided with asbestos cement top to receive the Kjeldhal flasks with electric heating elements connected through individual ON/OFF switches & controlled by a energy regulator or individual energy regulator, without glass parts. The reciever flask can be kept on the stand.
A) Unit for three tests with single energy regulator.
B) Unit for three tests with three energy regulator.
C) Unit for six tests with single energy regulator.
D) Unit for six tests with energy regulator.

Compact model for routine work in medical and industrial laboratories. The special features include : Easy lid lock, stepless speed regulator, safety fuse, elegant front panel. The basic unit comprises of  0-60 minutes timer (digital timer & digital rpm meter can also be provided) and speed meter.
Max. Speed 4000 rpm 
Operate on 230V, single phase 50Hz. AC/DC.
Rotor Heads Listing
A) Swing out heads (with glass tubes) Capacity Max.speed RPM
(i) 8x15ml 3500
(ii) 4x50ml 3500
(B) Angle heads (with Polypropylene tube)
(i) 8x15ml 4000
(ii) 4x50ml 4000

Digital Photocolorimeter with 8 glass filters, main operated sample size 1 ml with 2 ½ digit LED display panel. No calculations required. Sample size 1 ml. 3 digit LED display.

Suitable for supporting glassware or bath. The height of top jack support is easily & accurately adjustable by rotation of the knob. Jacks are powder coated with very good finish.

Catalouge  Size of Top Plate Material No. cm.:

• 5127/01 8x7 Mild Steel
• 5127/02 8x7 Aluminum
• 5127/03 8x7 Stainless Steel
• 5127/04 12x14 Mild Steel
• 5127/05 12x14 Aluminum
• 5127/06 12x14 Stainless Steel
• 5127/07 20x20 Mild Steel
• 5127/08 20x20 Aluminum
• 5128/09 20x20 Stainless Steel
• 5129/10 25x25 Mild Steel

Fitted with 1 No. U.V. Tube, 2 No. Flouricent  tube with manometer, Acrylic Door, air gasket, with S.S table top.Size :- (a) 2’x2’x2
(b) 3’x2’x2’
(c) 4’x2’x2’* Other sizes on request*** Sizes available in both Horizontal & Vertical.

Ideal Instrument to check blister packs, strip forleak test. The instrument is equipped with long lasting diaphram vacuum pump which gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum dessicator sustains vacuum for long time. A vacuum gauge is provided to incicate vacuum level which is connected to isolation valve to disconnect the source, thus avoiding the need of continuos  running of vacuum pump. A 0-5 minutes digital timer helps the operator to do other works. Complete in GMP stainless steel body with phenomenal compactness.

12x9x1” thick board with S.S. Top, side adjustable strips for various thickness. Hard wood roller, fraction punch of size 8,9,12 to 16mm( set of 3)

Electrically operated, fitted with speed regulator. (Supplied with Teflon ball)
A) Without hot plate
B) With hot plate and energy regulator.

A versatile assembly serving both for heart perfusion and as all-purpose thermostatic organ bath.  The transparent perspex bath is 12”x9”x8” and rests on a metal stand. A 1”x3/8” thick  edge at the top makes clamps etc. Carrying the uprights and Temperature of the bath is regulated (Constant). Thermostatic sensitivity ±2°C. The stirrer unit is completely in independent, and dips into the bath in one corner, and fixes on its special stainless steel upright. A perspex connection box is fitted to the bath frame, and carries all the electronic leads and connections. Two pilot lamps indicate the thermostat and stirrer operation. Extra accessories to enable the unit to be used as an all- purpose organ bath (2 unit ) arc :-
a) Double set of glass inner vessels.
b) Oxygen tubes.
c) Warming coils.
d) Levers with stainless steel capillary.
e) Four uprights with boss heads.
f) X blocks.
Complete assembly with upright stand, double reservoir, mercury manometer.

A series of multi-purpose duty shekers, complete with carrier for flasks test tube racks, bottles etc. Speeds are uneffected by normal live voltage fluctuations or loading within specified limit. Note : Timer (Analog/ Digital) can be fitted on request at extra cost.

(Laboratory stirrer) :- fitted with speed regulator, height and space adjustable 1/20 H. P. AC/DC motor.

Temperature upto 350°C. Three capillary holes and a magnifying lense, Complete with thermometer.

A) 0-25mm Indian make packed in velvet box.
B) 0-25mm Imported packed wooden/ plastic box.

With tip ejector fixed volume.a. 1ml b. 2mlc. 5ml d. 10mle. 20ml f. 25mlg. 50ml h 100mli 200ml j 250mlk 300ml l 400mlm 500ml n. 1000mlo. 1-10ml any size.

(Medical or Pathological microscope) 10x & 45x & 100x objectives (Spring loaded) Mechanical stage, dust cover, box with lock & key arrangement.

Vacuum type flask and clamp.
Membrane Funnel Flask With neon-Prene
Dia mm Cap.ml Cap. Ml cork fitting
A)25mm 25 250B)25mm 50 500C)47mm 3 00 1000

Fitted with 10lt. S.S Vessel & stirrer with 1/20 H.P. Motor, speed of the motor can be controlled through ragulator.

Laboratory size, hammer type, with H.P. (Single phase) 220 volts, 50C/S A.C. Consisting of four steel hammers fixed to a disc of 3” in dia 1” thick through which passes a shaft being revolved at 3000 R.P.M The hammers are enclosed in a C.l. Drum, the sides and upper surface of which are roughened. The inner surface is undulating.The lower part of drum is made of chrome plated brass and is detachable so that, SS sieves of different mesh size (a set of three sieves of coarse, medium and fine (Supplied with the instrument) can be easily placed. Hopper is made of die casted alluminium, Built on angle iron frame of size 24”x14”x2” high* 1/4 H.P. Or ½ H.P. Or 1 H.P (acc. To specification provided by customer)-Do- mounted on Iron base. Size 18”x12” (small size).

Ideal instruments for testing of drinking water & sewage disposal water measurements upto 1000 JTU/NTU.
A) Digital Turbidity meter 3 digit LED display range upto 1000 NTU/JTU Table ModelB) Digital Nephelometer 3 digit LED Display Range up to 200 NTU/JTU Table ModelC) Laboratory Nephelometer (Analog) Range upto 100 NTU ( Table model)
Accessories request :-1. Test tube set of 52. Spare lamp 6V, 1 AMP.

Same as Collapsible tube Filling Machine but Electrically Operated. Suitable to fill tubes, bottles etc. In the range of 5 gms to 90gms. Per stroke , motorised operated (motor ½ Hpor DC geared motor). The unit is Supplied complete with 3 set of standard nozzles and all electrical accessories in the motorized models.

Made from imported perpex sheet (graduated) size 8”x8”.

Stainless steel 6”x1” vide blade, stout flexible, made from imported stainless steel with superior wooden handle.

Made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe.
Remoable and replaceable by sliding IN or OUT blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the recepatable after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the S.S top is heated a set of electric lamps, placed to effect balanced heat distribution, dog holder with its S.S upright slide along slot in the top useful for fixing accessories. A.S.S swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steel pipe frame handle and wheels for conscience in moving. Table top size 51”x18”x40” high.