Cement And Concrete Testing Equipment

Product Price :Get Latest Price

For 100mm dia x 200mm length cylinder.
Salient Features

• Specifications : Same as above but for use with specimens 100mm dia x 200mm long.

Product Price :Get Latest Price

The laboratory pulverizer is a disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation. The instrument is useful for assaying, mining and for metallurgical, quarrying, aggregate processing, chemical, geological and industrial laboratories. It is a self contained grinder, with a rotary disc, having a planetary movement in a vertical plane. This feature gives added life to the moving parts and produces a sample of uniform fineness.
Salient Features

• Grinding is done between two discs-one stationery and the other revolving eccentrically at high speed. The discs are made from heat treated mehanite metal. With the help of a convenient hand wheel, the size of the final product can be adjusted. This can be done, even while the machine is in operation. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to it, for removal of ground samples and for cleaning. The Pulveriser has a capacity of reducing about half of a kg. of a quartz type sample to 100 mesh in about a minute. The Pulveriser is supplied complete with a 3 H.P. motor, a starter, a "V" belt pulley drive and mounting. Wired for 400 v, 3 Ph, 50 Hz.
  Disc Diameter------175mm.
  Maximum Feed size------6mm.
  Yield------250 gms./min.
  Size of Finished Product------100 mesh.

Product Price :Get Latest Price

Used for determining the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate.
Salient Features

• Specifications: the equipment comprises of -a conical metal mould1. 5 inch dia at the top, 3. 5 inch dia at the base and 2. 7/8 inch in height. A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter.

Product Price :Get Latest Price

The instrument is used for workability as well as consistency for fresh concrete. A slump cone and a graduated rod supplied with the instrument helps the operator to find out slump values and Vibration Table with container and acrylic disc is used to find out workability of concrete expressed in Vee Bee degrees, which is defined as the time in seconds to complete required vibrating at which the fresh concrete flows out sufficiently to come in contract to the entire face of acrylic disc.
Salient Features

• Specifications : The equipment consists of : A Vibrating Table size 380mm long and 260mm wide, resting upon elastic support at a height of about 305mm above the floor, complete with start/stop switch, cord and plug. A holder is fixed to the base into which a swivel arm is telescoped with funnel and guide sleeve. The swivel arm is also detachable from the vibrating table. A graduated rod is fixed on a swivel arm and its end a plastic disc is screwed. The division of scale on the rod record, the slump of the concrete in millimeters, supplied complete with a sheet metal container with lifting handles which can easily be fixed to the Vibrating Table. A slump cone open at both ends with lifting handles and a Tamping rod of size 16mm dia and 600mm long, rounded at one end.